Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE HYDX 97SC 3C 0.56MM G known as 97SC Hydro-X 3C .56MM 0.25KG A
- Product Code
- 893358
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Solder Wire
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available). If symptoms develop and persist, get medical attention. Wash clothing before reuse.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Do not induce vomiting. Never give anything by mouth to an unconscious person. If symptoms develop and persist, get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, dry chemical or carbon dioxide.
Not available.
Do not use water on fires where molten metal is present.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Scrape up spilled material and place in a closed container for disposal.
Related Products
Similar products with comparable safety profiles
LOCTITE HYDX SN63 3C 0.38MM R known as 63/37 HX 3C 0.38MM 0.25KG AM (
---
LOCTITE C 502 96SC 5C 0.32MM G known as 96SC C502 5C 0.32MM 0.25KG
---
LOCTITE C 502 96SC 5C 0.38MM G known as 96SC C502 5C 0.38MM 0.25KG AS
---
LOCTITE C 400 96SC 5C 0.5MM G
---
LOCTITE C 502 SN63 3C 0.61MM S known as 63/37 C502 3C 0.61MM 0.5KG
---
LOCTITE EA 9845LC 020-029 AERO known as HYSOL EA 9845 LSC 0.020/0.029 S
---
LOCTITE C 502 SN63 3C 0.81MM S known as 63/37 C502 3C 0.81MM 0.5KG AM
---
LOCTITE C 502 SN63 5C 0.38MM R known as 63/37 C502 5C 0.38MM 0.25KG AM
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Wear suitable protective clothing, gloves and eye/face protection. Avoid contact with eyes, skin and clothing. Avoid skin contact with molten resins. When using, do not eat, drink or smoke. Wash thoroughly after handling.
Store in original container until ready to use. Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
When using, do not eat, drink or smoke. Wash thoroughly after handling.
Keep in a cool, well ventilated area away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
Will not occur.
Solder alloy will react with concentrated nitric acid to produce toxic fumes of nitrogen oxides.
Strong oxidizing agents. Strong acids and strong bases.
Oxides of carbon. Metal oxide fumes. Formaldehyde. Thermal decomposition can lead to release of irritating gases and vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE HYDX 97SC 3C 0.56MM G known as 97SC Hydro-X 3C .56MM 0.25KG A?
The signal word is no signal word.
What is the physical form of LOCTITE HYDX 97SC 3C 0.56MM G known as 97SC Hydro-X 3C .56MM 0.25KG A?
LOCTITE HYDX 97SC 3C 0.56MM G known as 97SC Hydro-X 3C .56MM 0.25KG A is a solid with gray / grey color.
What is the solubility of LOCTITE HYDX 97SC 3C 0.56MM G known as 97SC Hydro-X 3C .56MM 0.25KG A?
Insoluble
What is LOCTITE HYDX 97SC 3C 0.56MM G known as 97SC Hydro-X 3C .56MM 0.25KG A used for?
Solder Wire
What is the melting point of LOCTITE HYDX 97SC 3C 0.56MM G known as 97SC Hydro-X 3C .56MM 0.25KG A?
The melting point is 217 °C (422.6 °F) (solder alloy) and the boiling point is Not available..