NextSDS Logo
Safety Data Sheet EN

BONDERITE C-IC 735 ACID CLEANER known as P3 RIDOLINE 735

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE C-IC 735 ACID CLEANER known as P3 RIDOLINE 735
Product Code
1671566

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Acidic Cleaner for Industrial Application

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Met. Corr. Cat. 1 H290
Skin Corr. Cat. 1 H314
Eye Dam. Cat. 1 H318
Carc. Cat. 1A H350

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS08 - Serious health hazard

GHS08

Hazard Statements

H290 MAY BE CORROSIVE TO METALS.
H314 CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
H350 MAY CAUSE CANCER.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P234 Keep only in original packaging.
P264 Wash affected area thoroughly after handling.
P280 Wear protective gloves, clothing, eye and face protection.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing.
P304 + P340 + P310 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Immediately call a POISON CENTER or physician.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical attention.
P363 Wash contaminated clothing before reuse.
P390 Absorb spillage to prevent material damage.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Sulfuric acid 7664-93-9 30 - 60% Yes
Poly(oxy-1,2-ethanediyl), .alpha.-undecyl.-omega.-hydroxy-, branched and linear, 10-11EO 127036-24-2 1 - 5% Yes
Alcohols, C12-14, ethoxylated propoxylated 68439-51-0 1 - 5% Yes
Ferric sulfate 10028-22-5 1 - 5% Yes

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.

Skin contact

Immediately remove soiled or soaked clothing. For skin contact, flush with large amounts of water. Seek immediate medical attention. If irritation persists, repeat flushing and get medical attention. Discard any shoes or clothing items that cannot be decontaminated.

Symptoms: irritation

Eye contact

In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.

Ingestion

Seek medical advice. DO NOT induce vomiting unless directed to do so by medical personnel. Give one to two glasses of water or milk. Never give anything by mouth to a victim who is unconscious or is having convulsions.

Immediate Medical Attention

Seek immediate medical attention.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use media appropriate for surrounding material.

Unsuitable media

Not available.

Specific hazards

This product is an aqueous mixture which will not burn.

Instructions

Wear full protective clothing. Wear a self-contained breathing apparatus with a full face piece operated in pressure-demand or other positive pressure mode.

Firefighter Protection

Wear full protective clothing. Wear a self-contained breathing apparatus with a full face piece operated in pressure-demand or other positive pressure mode.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Do not take internally. For industrial use only. NEVER ADD WATER TO PRODUCT. For dilutions, add product slowly to water while stirring. Use caution; heat may be generated.

Storage

For safe storage, store at or below 120 °F (48.9 °C). Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Thaw and mix thoroughly if frozen.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Density
1.26
Solidification Point
---
Form
---
Lower Explosive Limit
Not available.
Bulk Density
---
Evaporation Rate
Not determined
Colour Intensity
---
Metal Corrosion
---
Physical State Data
liquid
Relative Evaporation Rate
---
Vapor Density
---
Voc Content
Not available.
Cloud Point
---
Partition Coefficient
Not determined
Solubility
Complete
Flash Point
Not applicable
Properties Status
---
Flammability
Not applicable
Ph
< 1
Solubility In Water
---
Relative Density
---
Dynamic Viscosity
Not available.
Upper Explosive Limit
Not available.
Auto Ignition Temperature
Not determined
Melting Point
< 0 °C (< 32°F)
Crystallisation Point
---
Kinematic Viscosity
Not available.
Odor Threshold
Not available.
Explosive Limits
---
Odor
Sharp acid
Appearance
---
Boiling Point
> 100 °C (> 212°F)calculated
Decomposition Temperature
Not available.
Colour
Amber
Freezing Point
---
Physical State
Liquid
Vapor Pressure
Not determined
Softening Point
---
Molecular Weight
---
State Under Standard Conditions
---
Solubility In Fat
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Excessive heat.

Incompatible

This product may react with strong alkalies.

Decomposition

Upon decomposition, this product may yield sulfur dioxide, carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN2796
Shipping Name
Sulfuric acid solution
Transport Class
8
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for BONDERITE C-IC 735 ACID CLEANER known as P3 RIDOLINE 735?

The signal word is danger.

What is the physical form of BONDERITE C-IC 735 ACID CLEANER known as P3 RIDOLINE 735?

BONDERITE C-IC 735 ACID CLEANER known as P3 RIDOLINE 735 is a liquid with amber color. It has sharp acid odor.

What is the solubility of BONDERITE C-IC 735 ACID CLEANER known as P3 RIDOLINE 735?

Complete

What is BONDERITE C-IC 735 ACID CLEANER known as P3 RIDOLINE 735 used for?

Acidic Cleaner for Industrial Application

What are the hazard statements for BONDERITE C-IC 735 ACID CLEANER known as P3 RIDOLINE 735?

This substance has 3 hazard statements:

  • H290: MAY BE CORROSIVE TO METALS.
  • H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
  • H350: MAY CAUSE CANCER.

What is the melting point of BONDERITE C-IC 735 ACID CLEANER known as P3 RIDOLINE 735?

The melting point is < 0 °C (< 32°F) and the boiling point is > 100 °C (> 212°F)calculated.