Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-ZN 882X MU
- Product Form
- Conversion coating
- Product Code
- 2323279
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium nitrate | 7631-99-4 | 20 - 30% | Yes |
| Zinc dihydrogen phosphate | 13598-37-3 | 10 - 20% | Yes |
| Zinc nitrate | 7779-88-6 | 5 - 10% | Yes |
| Nitric acid | 7697-37-2 | 1 - 5% | Yes |
| Phosphoric acid | 7664-38-2 | 1 - 5% | Yes |
| Calcium nitrate | 10124-37-5 | 1 - 5% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air.
For skin contact, flush with large amounts of water.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes.
DO NOT induce vomiting unless directed to do so by medical personnel.
Immediate Medical Attention
Seek medical attention if symptoms develop or persist (inhalation). Seek immediate medical attention (skin contact). Seek immediate medical attention (eye contact).
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
Formation of toxic gases is possible during heating or in fires.
Wear self contained breathing apparatus. Wear protective equipment.
Firefighter Protection
Wear self contained breathing apparatus. Wear protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Do not take internally. Wear protective equipment. Wash thoroughly after handling. For industrial use only.
store between -20 °C (-4°F) and 50 °C (122°F)
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Not available.
Will not occur.
Keep away from heat, ignition sources and incompatible materials.
This product may react with strong alkalies.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3264
- Shipping Name
- Corrosive liquid, acidic, inorganic, n.o.s. (Nitric acid, Sodium nitrate)
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE M-ZN 882X MU?
The signal word is danger.
What is the physical form of BONDERITE M-ZN 882X MU?
BONDERITE M-ZN 882X MU is a liquid appearing as clear with clear color. It has odorless odor.
What are the hazard statements for BONDERITE M-ZN 882X MU?
This substance has 3 hazard statements:
- H302: HARMFUL IF SWALLOWED.
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
- H336: MAY CAUSE DROWSINESS OR DIZZINESS.
What is the melting point of BONDERITE M-ZN 882X MU?
The melting point is Not available. and the boiling point is > 100 °C (> 212°F).