NextSDS Logo
Safety Data Sheet EN

TEROSON RB 451 1TX10X49 PE EX

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TEROSON RB 451 1TX10X49 PE EX
Product Form
Acoustic Product
Product Code
2919337

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2
Eye Irrit. Cat. 2A
Resp. Sens. Cat. 1
Skin Sens. Cat. 1
STOT SE Cat. 3

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H315 CAUSES SKIN IRRITATION.
H317 MAY CAUSE AN ALLERGIC SKIN REACTION.
H319 CAUSES SERIOUS EYE IRRITATION.
H334 MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
H335 MAY CAUSE RESPIRATORY IRRITATION.

Precautionary Statements

P261 Avoid breathing dust or fumes.
P264 Wash affected area thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves, eye protection, and face protection.
P284 [In case of inadequate ventilation] wear respiratory protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention.
P342 + P311 If experiencing respiratory symptoms: Call a poison center or physician.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or physician if you feel unwell.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Talc 14807-96-6 30 - 60% No
Limestone 1317-65-3 10 - 30% No
Petroleum resins 64742-16-1 10 - 30% No
Residual oils (petroleum), hydrotreated 64742-57-0 5 - 10% No
Rubber, natural 9006-04-6 5 - 10% No
Zinc oxide 1314-13-2 1 - 5% No
C,C'-azodi(formamide) 123-77-3 1 - 5% No
Carbon black 1333-86-4 1 - 5% No
di(benzothiazol-2-yl) disulphide 120-78-5 0.1 - 1% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.

Skin contact

Immediately wash skin thoroughly with soap and water. Obtain medical attention if irritation persists.

Eye contact

Immediately flush eyes with water for at least 15 minutes, while holding eyelids open. Seek medical attention at once.

Ingestion

Get medical attention. DO NOT induce vomiting unless directed to do so by medical personnel.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Unsuitable media

Not available.

Specific hazards

None identified.

Instructions

Wear full protective clothing. Wear self-contained breathing apparatus.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing fumes if this product is used at high temperatures. Use only with adequate ventilation. Do not take internally. For industrial use only.

Storage

Store in a cool, dry area. Store between 5 °C (41°F) and 35 °C (95°F).

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Colour Intensity
---
Physical State
Paste
State Under Standard Conditions
---
Solidification Point
---
Auto Ignition Temperature
Not available.
Boiling Point
Not determined
Solubility
Not available.
Voc Content
Not determined
Crystallisation Point
---
Physical State Data
solid
Vapor Pressure
Not determined
Kinematic Viscosity
Not available.
Dynamic Viscosity
Not available.
Relative Density
Not available.
Solubility In Fat
---
Relative Evaporation Rate
---
Flash Point
Not applicable
Partition Coefficient
Not determined log Pow:
Ph
Not applicable
Upper Explosive Limit
Not available.
Molecular Weight
---
Softening Point
---
Form
---
Properties Status
---
Bulk Density
---
Vapor Density
---
Evaporation Rate
Not determined
Density
---
Flammability
Not applicable
Metal Corrosion
---
Colour
Black
Decomposition Temperature
Not available.
Cloud Point
---
Solubility In Water
---
Melting Point
Not determined
Freezing Point
---
Explosive Limits
---
Appearance
---
Odor Threshold
Not available.
Lower Explosive Limit
Not available.
Odor
Mild
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Not available.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Avoid excessive heat and ignition sources.

Incompatible

This product may react with strong acids or oxidizing agents.

Decomposition

Upon decomposition, this product emits oxides of sulfur, carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TEROSON RB 451 1TX10X49 PE EX?

The signal word is danger.

What is the physical form of TEROSON RB 451 1TX10X49 PE EX?

TEROSON RB 451 1TX10X49 PE EX is a paste with black color. It has mild odor.

What is the solubility of TEROSON RB 451 1TX10X49 PE EX?

Not available.

What are the hazard statements for TEROSON RB 451 1TX10X49 PE EX?

This substance has 5 hazard statements:

  • H315: CAUSES SKIN IRRITATION.
  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
  • H319: CAUSES SERIOUS EYE IRRITATION.
  • H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
  • H335: MAY CAUSE RESPIRATORY IRRITATION.

What is the melting point of TEROSON RB 451 1TX10X49 PE EX?

The melting point is Not determined and the boiling point is Not determined.