Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEROSON SB S3000 BK BO 1L EPIG
- Product Form
- Underbody coating
- Product Code
- 2784710
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C9-C10, n-alkanes, isoalkanes, cyclics, <2% aromatics | 64742-48-9 | 10 - 30% | Yes |
| Calcium carbonate | 471-34-1 | 10 - 30% | Yes |
| Limestone | 1317-65-3 | 10 - 30% | Yes |
| Ethyl acetate | 141-78-6 | 10 - 30% | Yes |
| n-butyl acetate | 123-86-4 | 5 - 10% | Yes |
| Kaolin | 1332-58-7 | 1 - 5% | Yes |
| Talc | 14807-96-6 | 1 - 5% | Yes |
| Carbon black - Nano | 1333-86-4 | 1 - 5% | Yes |
| Quartz (SiO2), <1% respirable | 14808-60-7 | 0.1 - 1% | Yes |
| Phthalic anhydride | 85-44-9 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If not breathing, give artificial respiration. If breathing is difficult, oxygen should be administered by qualified personnel. Move to fresh air. If symptoms persist, seek medical advice.
Wipe off with paper towel or cloth. Rinse with running water and soap. Remove contaminated clothing and shoes. Wash contaminated clothing before reuse. Thoroughly clean shoes before reuse. Seek medical attention immediately.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Seek medical attention immediately.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Seek medical attention immediately.
Immediate Medical Attention
Seek medical attention immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Do not use high volume water jet.
In case of fire, keep containers cool with water spray.
Keep unnecessary personnel away.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Ensure adequate ventilation. Wear appropriate personal protective equipment. Refer to Section 8 "Exposure Controls / Personal Protection" prior to clean up. Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Scrape up spilled material and place in a closed container for disposal.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not breathe gas/fumes/vapor/spray. Avoid contact with eyes, skin and clothing. Do not wear contact lenses. Do not handle contact lenses until all sealant has been removed from hands. Residual sealant may transfer to lenses and cause eye irritation. Wash thoroughly after handling. See Section 8 of the SDS for Personal Protective Equipment.
Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use. Storage at 5 to 25°C is recommended.
Wash thoroughly after handling.
Keep away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials. Do not puncture, incinerate, or expose to temperatures above 48.9 °C (120 °F).
Oxidizing agents. Alkalis. Acids and bases.
Oxides of carbon. Oxides of nitrogen. Thermal decomposition can lead to release of irritating gases and vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1139
- Shipping Name
- Coating solution
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEROSON SB S3000 BK BO 1L EPIG?
The signal word is danger.
What is the physical form of TEROSON SB S3000 BK BO 1L EPIG?
TEROSON SB S3000 BK BO 1L EPIG is a liquid with black color. It has characteristic odor.
What is the solubility of TEROSON SB S3000 BK BO 1L EPIG?
Not miscible Water
What are the hazard statements for TEROSON SB S3000 BK BO 1L EPIG?
This substance has 6 hazard statements:
- H225: HIGHLY FLAMMABLE LIQUID AND VAPOUR.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
- H336: MAY CAUSE DROWSINESS OR DIZZINESS.
- H350: MAY CAUSE CANCER.
What is the melting point of TEROSON SB S3000 BK BO 1L EPIG?
The melting point is Not applicable, Product is a liquid and the boiling point is 84 °C (183.2 °F).