NextSDS Logo
Safety Data Sheet EN

BONDERITE M-ZN 3150 MU ZINC PHOSPHATE

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE M-ZN 3150 MU ZINC PHOSPHATE
Synonyms
BONDERITE 3150 MAKEUP

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Conversion coating

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Met. Corr. Cat. 1
Skin Corr. Cat. 1C
Eye Dam. Cat. 1
Resp. Sens. Cat. 1
Skin Sens. Cat. 1
Carc. Cat. 1A
STOT RE Cat. 1

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS08 - Serious health hazard

GHS08

Hazard Statements

H290 MAY BE CORROSIVE TO METALS.
H314 CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
H317 MAY CAUSE AN ALLERGIC SKIN REACTION.
H334 MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
H350 MAY CAUSE CANCER.
H372 CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P234 Keep only in original packaging.
P260 Do not breathe vapors, mist, or spray.
P264 Wash affected area thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves, clothing, eye and face protection.
P284 [In case of inadequate ventilation] wear respiratory protection.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing.
P304 + P340 + P310 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Immediately call a POISON CENTER or physician.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical attention.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P342 + P311 If experiencing respiratory symptoms: Call a poison center or physician.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P390 Absorb spillage to prevent material damage.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Phosphoric acid 7664-38-2 10 - 30% Yes
Manganese dihydrogen phosphate 18718-07-5 5 - 10% Yes
Zinc dihydrogen phosphate 13598-37-3 5 - 10% Yes
Nickel bis(dihydrogen phosphate) 18718-11-1 5 - 10% Yes

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.

Skin contact

Remove contaminated clothing and footwear. For skin contact, flush with large amounts of water. Seek immediate medical attention.

Eye contact

Rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.

Ingestion

Get medical attention. DO NOT induce vomiting unless directed to do so by medical personnel. Give one to two glasses of water or milk. Never give anything by mouth to a victim who is unconscious or is having convulsions.

Immediate Medical Attention

Seek medical attention if symptoms develop or persist (inhalation). Seek immediate medical attention (skin contact). Seek immediate medical attention (eye contact). Get medical attention (ingestion).

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use media appropriate for surrounding material.

Unsuitable media

Not available.

Specific hazards

This product is an aqueous mixture which will not burn.

Instructions

Wear full protective clothing. Wear self-contained breathing apparatus.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Wear appropriate personal protective equipment. Do not allow product to enter sewer or waterways.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Avoid breathing mists or aerosols of this product. Wash thoroughly after handling. Do not take internally. For industrial use only.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Thaw and mix thoroughly if frozen.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Colour
Green
Relative Density
---
Ph
2 - 3 (6% solution)
Odor Threshold
Not available.
Metal Corrosion
---
Form
---
Appearance
---
Solubility
Complete Water
Kinematic Viscosity
Not available.
Density
1.373 - 1.393
Boiling Point
> 100 °C (> 212°F) calculated
Solubility In Fat
---
Flash Point
Not applicable
Evaporation Rate
Not determined
Molecular Weight
---
Voc Content
Not available.
Freezing Point
---
Relative Evaporation Rate
---
Auto Ignition Temperature
Not applicable
Physical State
Liquid
Colour Intensity
---
Explosive Limits
---
Crystallisation Point
---
Dynamic Viscosity
Not available.
Vapor Density
---
Odor
Sour/Acid
State Under Standard Conditions
---
Melting Point
Not determined
Softening Point
---
Partition Coefficient
Not determined
Flammability
Not applicable
Solubility In Water
---
Cloud Point
---
Solidification Point
---
Properties Status
---
Physical State Data
liquid
Lower Explosive Limit
Not applicable
Upper Explosive Limit
Not applicable
Decomposition Temperature
Not available.
Vapor Pressure
Not available.
Bulk Density
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Not available.

Hazardous reactions

Will not occur.

Avoid

None identified.

Incompatible

This product may react with strong alkalies.

Decomposition

Decomposes with heat to produce oxides of nitrogen.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN3264
Shipping Name
Corrosive liquid, acidic, inorganic, n.o.s. (Phosphoric acid, Nickel phosphate)
Transport Class
8
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is BONDERITE M-ZN 3150 MU ZINC PHOSPHATE known by?

BONDERITE M-ZN 3150 MU ZINC PHOSPHATE is also known as: BONDERITE 3150 MAKEUP

What is the hazard signal word for BONDERITE M-ZN 3150 MU ZINC PHOSPHATE?

The signal word is danger.

What is the physical form of BONDERITE M-ZN 3150 MU ZINC PHOSPHATE?

BONDERITE M-ZN 3150 MU ZINC PHOSPHATE is a liquid with green color. It has sour/acid odor.

What is the solubility of BONDERITE M-ZN 3150 MU ZINC PHOSPHATE?

Complete Water

What is BONDERITE M-ZN 3150 MU ZINC PHOSPHATE used for?

Conversion coating

What are the hazard statements for BONDERITE M-ZN 3150 MU ZINC PHOSPHATE?

This substance has 6 hazard statements:

  • H290: MAY BE CORROSIVE TO METALS.
  • H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
  • H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
  • H350: MAY CAUSE CANCER.
  • H372: CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.

What is the melting point of BONDERITE M-ZN 3150 MU ZINC PHOSPHATE?

The melting point is Not determined and the boiling point is > 100 °C (> 212°F) calculated.