Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEROSON PU 3D 63217TY2A010M1
- Product Code
- 1671243
- Synonyms
- 2D PiFi 63217-TY2-A010M1
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Coating
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| EVA, Maleic anhydride modified | --- | 10 - 30% | Yes |
| Distillates, petroleum, steam-cracked, polymd. | 68131-77-1 | 5 - 10% | Yes |
| Zinc oxide | 1314-13-2 | 1 - 5% | Yes |
| Asphalt, oxidized | 64742-93-4 | 1 - 5% | Yes |
| Vinyl acetate | 108-05-4 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Immediately wash skin thoroughly with soap and water. Obtain medical attention if irritation persists.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Do not induce vomiting.
Immediate Medical Attention
Get immediate medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
None expected.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Scrape up spilled material and place in a closed container for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing fumes if this product is used at high temperatures. Use only with adequate ventilation. Do not take internally. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Keep away from heat, spark and flame. Keep away from alkalis.
This product may react with strong oxidizing agents. This product may react with strong reducing agents.
Irritating and/or toxic fumes and gases may be emitted upon the product's decomposition. Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3077
- Shipping Name
- Environmentally hazardous substance, solid, n.o.s. (Zinc oxide)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is TEROSON PU 3D 63217TY2A010M1 known by?
TEROSON PU 3D 63217TY2A010M1 is also known as: 2D PiFi 63217-TY2-A010M1
What is the hazard signal word for TEROSON PU 3D 63217TY2A010M1?
The signal word is warning.
What is the physical form of TEROSON PU 3D 63217TY2A010M1?
TEROSON PU 3D 63217TY2A010M1 is a solid with tan color. It has mild odor.
What is TEROSON PU 3D 63217TY2A010M1 used for?
Coating
What are the hazard statements for TEROSON PU 3D 63217TY2A010M1?
This substance has 4 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H351: SUSPECTED OF CAUSING CANCER.
What is the melting point of TEROSON PU 3D 63217TY2A010M1?
The melting point is Not determined and the boiling point is Not applicable.