Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-ZN 37 ZINC PHOSPHATE known as BONDERITE 37 REPL B
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Coating
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS03
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Hazardous Component(s) | CAS Number | Weight %*
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Phosphoric acid | 7664-38-2 | 10 - 30% | Yes |
| Zinc oxide | 1314-13-2 | 5 - 10% | Yes |
| Nickel nitrate | 13138-45-9 | 5 - 10% | Yes |
| Nitric acid | 7697-37-2 | 1 - 5% | Yes |
| Fluorosilicic acid | 16961-83-4 | 1 - 5% | Yes |
| Hydrogen fluoride | 7664-39-3 | 0.1 - 1% | Yes |
IDH number: 594572 Product name: BONDERITE M-ZN 37 ZINC PHOSPHATE known as BONDERITE 37 REPL B Page 2 of 8
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist. If breathing is difficult, give oxygen. Trained personnel should administer 2.5% calcium gluconate through a nebulizer for 20 minutes.
Remove contaminated clothing and footwear while rinsing the affected area with large amounts of running water for at least 15 minutes. GET IMMEDIATE MEDICAL ATTENTION. If iced solution of 0.13% aqueous Benzalkonium Chloride (Zephiran) or 2.5% calcium gluconate gel is available, rinsing may be limited to 5 minutes, with the soak solution or gel applied as soon as the rinsing is stopped. If using calcium gluconate gel, it should be continuously re-applied and massaged into the affected area until pain has been relieved for at least 30 minutes. If Benzalkonium Chloride (Zephiran) or calcium gluconate gel is not available, rinsing must continue until medical treatment is provided.
Immediately flush affected eye with large amounts of gently flowing water or 0.9% sterile saline solution for at least 15 minutes. Hold eyelid wide open. Get immediate medical attention. Eye flushing should continue during transportation to a doctor.
Get immediate medical attention. Do not induce vomiting. Attempt immediate administration of a fluoride binding substance: milk, chewable calcium carbonate tablets or 4-8 ounces (120-240 ml) of milk of magnesia or a liquid antacid. Avoid large amounts of liquid as it may induce vomiting. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Get immediate medical attention for all exposure routes.
Medical Treatment
Treatment of hypocalcemia associated with corrosive fluoride compounds exposure may be corrected by intravenous calcium gluconate or calcium chloride. Treatment of hypomagnesemia may be corrected by intravenous magnesium sulfate.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE M-ZN 37S R B ZINC PHOSPHATE known as BONDERITE 37S REPL B
---
BONDERITE M-ZN 3696X R ZINC PHOSPHATE known as BONDERITE 3696X REPL
---
BONDERITE M-ZN 3410 R I ZINC PHOSPHATE known as BONDERITE 3410 REPL I
---
BONDERITE M-ZN SX 35 R ZINC PHOSPHATE
---
BONDERITE M-ZN 181X R ZINC PHOSPHATE known as BONDERITE 181X REPL
---
BONDERITE M-ZN 769 M ZINC PHOSPHATE known as BONDERITE M-ZN 769-M
---
BONDERITE M-ZN AX43 R3 BU ZINC PHOSPHATE
---
BONDERITE M-ZN 910 ZINC PHOSPHATE known as BONDERITE 910 REPL G
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. For industrial use only. Do not take internally.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials.
This product may react with strong acids, bases and oxidizing agents. This material will react with glass, concrete, certain metals, silica containing materials, rubber, leather, and many organics.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. May liberate hydrogen fluoride.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3264
- Shipping Name
- Corrosive liquid, acidic, inorganic, n.o.s. (Phosphoric acid, Nitric acid)
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE M-ZN 37 ZINC PHOSPHATE known as BONDERITE 37 REPL B?
The signal word is danger.
What is the physical form of BONDERITE M-ZN 37 ZINC PHOSPHATE known as BONDERITE 37 REPL B?
BONDERITE M-ZN 37 ZINC PHOSPHATE known as BONDERITE 37 REPL B is a liquid with green color. It has sour/acid odor.
What is the solubility of BONDERITE M-ZN 37 ZINC PHOSPHATE known as BONDERITE 37 REPL B?
Complete Water
What is BONDERITE M-ZN 37 ZINC PHOSPHATE known as BONDERITE 37 REPL B used for?
Coating
What are the hazard statements for BONDERITE M-ZN 37 ZINC PHOSPHATE known as BONDERITE 37 REPL B?
This substance has 10 hazard statements:
- H272: MAY INTENSIFY FIRE; OXIDIZER.
- H290: MAY BE CORROSIVE TO METALS.
- H302 + H312: HARMFUL IF SWALLOWED OR IN CONTACT WITH SKIN.
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
- H341: SUSPECTED OF CAUSING GENETIC DEFECTS.
- H350: MAY CAUSE CANCER.
- H360: MAY DAMAGE FERTILITY OR THE UNBORN CHILD.
- H372: CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of BONDERITE M-ZN 37 ZINC PHOSPHATE known as BONDERITE 37 REPL B?
The melting point is Not available. and the boiling point is > 100 °C (> 212°F).