Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE ABLESTIK FDA 2T-H known as TRA-BOND FDA2T-H
- Product Code
- 1446170
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Hardener
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Amine adduct | --- | 80 - 100% | Yes |
| 3,6-diazaoctanethylenediamin | 112-24-3 | 10 - 30% | Yes |
IDH number: 1446170 Product name: LOCTITE ABLESTIK FDA 2T-H known as TRA-BOND FDA2T-H
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. Get medical attention. Wash clothing before reuse.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Do not induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Store in a closed container until ready for disposal.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
LOCTITE ABLESTIK FDA 2T-R known as TRA-BOND FDA2T-R
---
LOCTITE ABLESTIK FDA 2LVWH01-R known as TRA-BOND FDA2LVWH01-R
---
LOCTITE ABLESTIK FDA 2-H known as TRA-BOND FDA2 BIPAX 6 GR - H
---
LOCTITE ABLESTIK 2111-H known as TRA-BOND 2111-H
---
LOCTITE ABLESTIK 2254-R known as TRA-BOND 2254-R
---
LOCTITE ABLESTIK 2106T-R known as TRA-BOND 2106T-R
---
LOCTITE ABLESTIK 342-14T known as TRA-BOND 342-14T
---
LOCTITE ABLESTIK 2248-R known as TRA-BOND 2248-R
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist.
Keep in a cool, well ventilated area. Keep container tightly closed until ready for use.
Wash thoroughly after handling.
Keep away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
High temperatures. Store away from incompatible materials. Heat, flames, sparks and other sources of ignition.
Strong acids. Strong oxidizing agents.
Oxides of carbon. Oxides of nitrogen. Irritating vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2259
- Shipping Name
- Triethylenetetramine solution
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE ABLESTIK FDA 2T-H known as TRA-BOND FDA2T-H?
The signal word is danger.
What is the physical form of LOCTITE ABLESTIK FDA 2T-H known as TRA-BOND FDA2T-H?
LOCTITE ABLESTIK FDA 2T-H known as TRA-BOND FDA2T-H is a liquid with amber color. It has ammonia odor.
What is LOCTITE ABLESTIK FDA 2T-H known as TRA-BOND FDA2T-H used for?
Hardener
What are the hazard statements for LOCTITE ABLESTIK FDA 2T-H known as TRA-BOND FDA2T-H?
This substance has 3 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H318: CAUSES SERIOUS EYE DAMAGE.
What is the melting point of LOCTITE ABLESTIK FDA 2T-H known as TRA-BOND FDA2T-H?
The melting point is Not available. and the boiling point is Not available..