NextSDS Logo
Safety Data Sheet EN

TEROSON RB 3254 HO50KG

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TEROSON RB 3254 HO50KG
Product Code
2919955

Regulatory Identifiers

CAS Number
N/A

Identified Uses

adhesive and sealant

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2
Eye Dam. Cat. 1
Skin Sens. Cat. 1
Carc. Cat. 1A

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H315 CAUSES SKIN IRRITATION.
H317 MAY CAUSE AN ALLERGIC SKIN REACTION.
H318 CAUSES SERIOUS EYE DAMAGE.
H350 MAY CAUSE CANCER.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P261 Avoid breathing mist/vapours.
P264 Wash affected area thoroughly after handling.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves, clothing, eye and face protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical attention.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Limestone 1317-65-3 30 - 60% Yes
Calcium oxide 1305-78-8 1 - 5% Yes
Aluminum triphosphate 13939-25-8 1 - 5% Yes
Distillates, petroleum, steam-cracked, polymd. 68131-77-1 1 - 5% Yes
Magnesium oxide 1309-48-4 1 - 5% Yes
Quartz (SiO2) respirable particulates (RCS) >=10% 14808-60-7 0.1 - 1% Yes
Propylidynetrimethyl trimethacrylate 3290-92-4 0.1 - 1% Yes
Glass, oxide, chemicals 65997-17-3 0.1 - 1% Yes
Carbon black - Nano 1333-86-4 0.1 - 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention.

Skin contact

Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.

Eye contact

In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.

Ingestion

Get immediate medical attention. Do not induce vomiting.

Immediate Medical Attention

Get immediate medical attention.

Medical Treatment

Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Unsuitable media

Not available.

Specific hazards

May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.

Instructions

Wear full protective clothing. Wear self-contained breathing apparatus.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Use only with adequate ventilation. Do not take internally. For industrial use only.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Partition Coefficient
Not available.
Vapor Density
---
Physical State
Liquid
Solubility In Water
---
Form
---
Dynamic Viscosity
Not available.
Decomposition Temperature
Not available.
Colour Intensity
---
Voc Content
0 %
Flash Point
>93.3 °C (>199.94 °F)
Solidification Point
---
Molecular Weight
---
Ph
Not applicable
Lower Explosive Limit
Not available.
Vapor Pressure
Not available.
Explosive Limits
---
Auto Ignition Temperature
Not available.
Solubility
Negligible Water
Properties Status
---
Density
---
Crystallisation Point
---
Flammability
Not applicable
State Under Standard Conditions
---
Appearance
---
Softening Point
---
Kinematic Viscosity
Not available.
Odor
Neutral
Melting Point
Not available.
Relative Density
1.4 - 1.5
Bulk Density
---
Solubility In Fat
---
Boiling Point
>105 °C (>221°F)
Upper Explosive Limit
Not available.
Evaporation Rate
Not available.
Relative Evaporation Rate
---
Physical State Data
liquid
Odor Threshold
Not available.
Colour
Black
Cloud Point
---
Freezing Point
---
Metal Corrosion
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Keep away from heat, ignition sources and incompatible materials.

Incompatible

This product may react with strong acids or oxidizing agents.

Decomposition

Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TEROSON RB 3254 HO50KG?

The signal word is danger.

What is the physical form of TEROSON RB 3254 HO50KG?

TEROSON RB 3254 HO50KG is a liquid with black color. It has neutral odor.

What is the solubility of TEROSON RB 3254 HO50KG?

Negligible Water

What is TEROSON RB 3254 HO50KG used for?

adhesive and sealant

What are the hazard statements for TEROSON RB 3254 HO50KG?

This substance has 4 hazard statements:

  • H315: CAUSES SKIN IRRITATION.
  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
  • H318: CAUSES SERIOUS EYE DAMAGE.
  • H350: MAY CAUSE CANCER.

What is the melting point of TEROSON RB 3254 HO50KG?

The melting point is Not available. and the boiling point is >105 °C (>221°F).