NextSDS Logo
Safety Data Sheet EN

BONDERITE L-GP 154N (GE) GRAPHITE DISPERSION IN SOLVENT ACHESON known as DAG154N(GE)

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE L-GP 154N (GE) GRAPHITE DISPERSION IN SOLVENT ACHESON known as DAG154N(GE)
Synonyms
DAG154N(GE)

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Lubricant

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2 H225
Eye Irrit. Cat. 2A H319
STOT SE Cat. 3 H336

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H225 HIGHLY FLAMMABLE LIQUID AND VAPOUR.
H319 CAUSES SERIOUS EYE IRRITATION.
H336 MAY CAUSE DROWSINESS OR DIZZINESS.

Precautionary Statements

P210 Keep away from heat, sparks, open flames, hot surfaces - no smoking.
P233 Keep container tightly closed.
P240 Ground and bond container and receiving equipment.
P241 Use explosion-proof equipment.
P242 Use non-sparking tools.
P243 Take action to prevent static discharges.
P261 Avoid breathing mist/vapours.
P264 Wash affected area thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves, clothing, eye and face protection.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337 + P313 If eye irritation persists: Get medical attention.
P370 + P378 In case of fire: Use foam, dry chemical or carbon dioxide to extinguish.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
P403 + P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or physician if you feel unwell.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
2-Propanol 67-63-0 60 - 80% Yes
n-Butyl alcohol 71-36-3 1 - 5% Yes
2-methylpentane-2,4-diol 107-41-5 1 - 5% Yes
1-methoxy-2-propanol 107-98-2 1 - 5% Yes
Graphite 7782-42-5 10 - 30% Yes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.

Skin contact

Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.

Eye contact

Immediately flush eyes with water for at least 15 minutes, while holding eyelids open. Seek medical attention at once.

Ingestion

Get immediate medical attention. DO NOT induce vomiting unless directed to do so by medical personnel.

Immediate Medical Attention

Get immediate medical attention (Ingestion). Seek medical attention at once (Eye contact).

Medical Treatment

Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Unsuitable media

Not available.

Specific hazards

May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.

Instructions

Wear full protective clothing. Wear self-contained breathing apparatus.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Do not allow product to enter sewer or waterways.

Cleanup methods

Remove all sources of ignition. Ensure adequate ventilation. Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Ground and bond all equipment as required (when transferring products). Keep away from heat, spark and flame. Use only with adequate ventilation. Do not take internally.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Do not pressurize, cut, heat or weld containers. Empty product containers may contain product residue. Do not reuse empty containers. Do not freeze.

Hygiene

Wash thoroughly after handling.

Fire prevention

Keep away from heat, spark and flame. Ground and bond all equipment as required (when transferring products). Ground and bond metal containers for liquid transfer to avoid static sparks.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Melting Point
-53.3 °C (-63.9 °F) calculated
Flash Point
11.1 °C (51.98 °F) Pensky Martens closed cup
Auto Ignition Temperature
Not determined
Evaporation Rate
1 (Butyl acetate = 1)
Softening Point
---
Colour
Gray / Grey
Voc Content
710 g/l
Relative Density
---
Physical State Data
liquid
Upper Explosive Limit
12 %
Kinematic Viscosity
> 20.5 mm2/s
Density
0.875 - 0.9
Freezing Point
---
Bulk Density
---
Boiling Point
82.3 °C (180.1 °F)calculated
State Under Standard Conditions
---
Appearance
---
Crystallisation Point
---
Vapor Density
---
Ph
Not applicable, Product is non-soluble (in water).
Relative Evaporation Rate
---
Physical State
Gel
Dynamic Viscosity
50 - 400 cp
Vapor Pressure
42 mbar (20 °C (68°F)) 240 mbar (50 °C (122°F))
Explosive Limits
---
Metal Corrosion
---
Solubility In Water
---
Molecular Weight
---
Form
---
Solubility
Insoluble Water
Partition Coefficient
Not determined
Solidification Point
---
Flammability
Not applicable
Odor
Alcohol
Cloud Point
---
Properties Status
---
Colour Intensity
---
Odor Threshold
Not available.
Lower Explosive Limit
2 %
Solubility In Fat
---
Decomposition Temperature
Not available.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Avoid excessive heat and ignition sources.

Incompatible

This product may react with oxidizing agents.

Decomposition

Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1139
Shipping Name
Coating solution
Transport Class
3
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is BONDERITE L-GP 154N (GE) GRAPHITE DISPERSION IN SOLVENT ACHESON known as DAG154N(GE) known by?

BONDERITE L-GP 154N (GE) GRAPHITE DISPERSION IN SOLVENT ACHESON known as DAG154N(GE) is also known as: DAG154N(GE)

What is the hazard signal word for BONDERITE L-GP 154N (GE) GRAPHITE DISPERSION IN SOLVENT ACHESON known as DAG154N(GE)?

The signal word is danger.

What is the physical form of BONDERITE L-GP 154N (GE) GRAPHITE DISPERSION IN SOLVENT ACHESON known as DAG154N(GE)?

BONDERITE L-GP 154N (GE) GRAPHITE DISPERSION IN SOLVENT ACHESON known as DAG154N(GE) is a gel with gray / grey color. It has alcohol odor.

What is the solubility of BONDERITE L-GP 154N (GE) GRAPHITE DISPERSION IN SOLVENT ACHESON known as DAG154N(GE)?

Insoluble Water

What is BONDERITE L-GP 154N (GE) GRAPHITE DISPERSION IN SOLVENT ACHESON known as DAG154N(GE) used for?

Lubricant

What are the hazard statements for BONDERITE L-GP 154N (GE) GRAPHITE DISPERSION IN SOLVENT ACHESON known as DAG154N(GE)?

This substance has 3 hazard statements:

  • H225: HIGHLY FLAMMABLE LIQUID AND VAPOUR.
  • H319: CAUSES SERIOUS EYE IRRITATION.
  • H336: MAY CAUSE DROWSINESS OR DIZZINESS.

What is the melting point of BONDERITE L-GP 154N (GE) GRAPHITE DISPERSION IN SOLVENT ACHESON known as DAG154N(GE)?

The melting point is -53.3 °C (-63.9 °F) calculated and the boiling point is 82.3 °C (180.1 °F)calculated.