Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE S-AD 1286 ACHESON known as SLA 1286
- Product Code
- 1224710
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Petroleum, dewaxed, paraffinic | 64742-56-9 | 1 - 5% | Yes |
| Methyl methacrylate | 80-62-6 | 0.1 - 1% | Yes |
| Distillates (petroleum), solvent-dewaxed heavy paraffinic < 3%DMSO | 64742-65-0 | 30 - 60% | Yes |
| Molybdenum disulphide | 1317-33-5 | 30 - 60% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Immediately wash skin thoroughly with soap and water. If adverse health effects develop seek medical attention.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. Do not induce vomiting. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
This product is combustible at high temperatures. May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal. Use non-sparking tools for clean-up.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE S-AD 1286 ACHESON
---
BONDERITE S-AD 1246 ACHESON
---
BONDERITE S-AD 1286 JP ACHESON
---
BONDERITE S-AD 1275 SOLID LUBRICANT ADDITIVE ACHESON known as SLA1275
---
BONDERITE S-AD 85 ACHESON GX
---
BONDERITE L-FG 144 ACHESON
---
BONDERITE S-AD 1720 SOLID LUBRICANT ADDITIVE ACHESON known as SLA1720
---
BONDERITE L-GP 154K ACHESON
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Use only with adequate ventilation. Do not take internally. For industrial use only.
Store between 5.0 °C (41°F) and 32.0 °C (89.6 °F). Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Keep away from heat, spark and flame.
Wash thoroughly after handling.
Keep away from heat, spark and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
This product may react with strong reducing agents.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials.
Oxidizing agents.
Upon decomposition, this product emits oxides of sulfur, carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE S-AD 1286 ACHESON known as SLA 1286?
The signal word is warning.
What is the physical form of BONDERITE S-AD 1286 ACHESON known as SLA 1286?
BONDERITE S-AD 1286 ACHESON known as SLA 1286 is a liquid with green color. It has mild odor.
What is the solubility of BONDERITE S-AD 1286 ACHESON known as SLA 1286?
Insoluble Water
What is BONDERITE S-AD 1286 ACHESON known as SLA 1286 used for?
Lubricant
What are the hazard statements for BONDERITE S-AD 1286 ACHESON known as SLA 1286?
This substance has 1 hazard statement:
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
What is the melting point of BONDERITE S-AD 1286 ACHESON known as SLA 1286?
The melting point is Not determined and the boiling point is > 371 °C (> 699.8 °F) calculated.