Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-FM 101-75 SUS
- Product Code
- 1685301
- Synonyms
- FORMING LUBRICANT ACHESON known as MULTAN PL101-75 SUS
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (petroleum), hydrotreated light paraffinic, <3% DMSO | 64742-55-8 | 30 - 60% | Yes |
| Petroleum distillates, hydrotreated, light naphthenic | 64742-53-6 | 5 - 10% | Yes |
| Magnesium sulfonate | --- | 5 - 10% | Yes |
| Mineral oil | --- | 5 - 10% | Yes |
| Mineral oil~ | --- | 1 - 5% | Yes |
| Distillates (petroleum), hydrotreated heavy naphthenic | 64742-52-5 | 30 - 60% | Yes |
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Flush with large amounts of water. If symptoms develop and persist, get medical attention.
Rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. DO NOT induce vomiting unless directed to do so by medical personnel.
Immediate Medical Attention
This material, if aspirated into the lungs, may cause chemical pneumonitis; treat the affected person appropriately.
Medical Treatment
Treat the affected person appropriately for chemical pneumonitis.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
Do not pressurize, cut, heat or weld containers. Empty product containers may contain product residue. Do not reuse empty containers.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal. Remove all sources of ignition.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Do not cut or weld on empty drums. Sufficient vapors from residues may be present to cause explosion and serious injury and/or death. Avoid breathing vapors or mists of this product. Provide adequate ventilation. Wash thoroughly after handling. Do not take internally. Keep away from heat, spark and flame.
Store between 40 °F (4.4 °C) and 100 °F (37.8 °C). Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Remove all sources of ignition. Thaw and mix thoroughly if frozen.
Wash thoroughly after handling.
Keep away from heat, spark and flame. Remove all sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Keep away from heat, spark and flame.
This product may react with oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is BONDERITE L-FM 101-75 SUS known by?
BONDERITE L-FM 101-75 SUS is also known as: FORMING LUBRICANT ACHESON known as MULTAN PL101-75 SUS
What is the hazard signal word for BONDERITE L-FM 101-75 SUS?
The signal word is danger.
What is the physical form of BONDERITE L-FM 101-75 SUS?
BONDERITE L-FM 101-75 SUS is a not available. with not available. color. It has not available. odor.
What is the solubility of BONDERITE L-FM 101-75 SUS?
Negligible
What is BONDERITE L-FM 101-75 SUS used for?
Lubricant
What are the hazard statements for BONDERITE L-FM 101-75 SUS?
This substance has 3 hazard statements:
- H304: MAY BE FATAL IF SWALLOWED AND ENTERS AIRWAYS.
- H315: CAUSES SKIN IRRITATION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of BONDERITE L-FM 101-75 SUS?
The melting point is Not determined and the boiling point is 310 °F (154.4 °C).