Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE ABLESTIK 8388A known as Ablebond 8388A (18g)
- Product Code
- 1200090
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Epoxy adhesive
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Silica, vitreous | 60676-86-0 | 30 - 60% | Yes |
| 2,2'-[[2-(oxiranyl)methoxy)-1,3-phenylene]bis(methylene)]bisoxirane | 13561-08-5 | 10 - 30% | Yes |
| Epoxy resin modifier | --- | 5 - 10% | Yes |
| Epoxy resin | --- | 1 - 5% | Yes |
| Quartz (SiO2), <1% respirable | 14808-60-7 | 1 - 5% | Yes |
| Synthetic Resin | --- | 0.1 - 1% | Yes |
| Reaction mass of 2-ethyl-4-methyl-1H-imidazole-1-propiononitrile and 2-ethyl-5-methyl-1H-imidazole-1-propiononitrile | 568591-00-4 | 0.1 - 1% | Yes |
| Titanium dioxide | 13463-67-7 | 0.1 - 1% | Yes |
| Toluene | 108-88-3 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. If symptoms develop and persist, get medical attention. Wash clothing before reuse.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Do not induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Scrape up as much material as possible. Store in a closed container until ready for disposal.
Related Products
Similar products with comparable safety profiles
LOCTITE ABLESTIK 8388A known as Ablebond 8388A (113.5g) DE
---
LOCTITE ABLESTIK 8360 known as Ablebond 8360 (8.5g)
---
LOCTITE ABLESTIK 8387B known as Ablebond 8387B (3g)
---
LOCTITE ABLESTIK 8390 known as Ablebond 8390 (34g)
---
LOCTITE ABLESTIK 8370C known as Ablebond 8370C (6.8g)
---
LOCTITE ABLESTIK 8351C known as Ablebond 8351C (17.5g)
---
LOCTITE ABLESTIK 8301 known as Ablebond 8301 (19.5)
---
LOCTITE ABLESTIK 979-1AS known as Ablebond 979-1AS (18g)
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Refer to Section 8.
Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
Wash thoroughly after handling.
Keep in a cool, well ventilated area away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Not available.
None under normal processing. Polymerization may occur at elevated temperature or in the presence of incompatible materials.
High temperatures. Heat, flames, sparks and other sources of ignition. Store away from incompatible materials.
Strong oxidizing agents. Strong acids and strong bases.
Oxides of carbon. Irritating organic vapours.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- Environmentally hazardous substance, liquid, n.o.s. (Epoxy resin)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE ABLESTIK 8388A known as Ablebond 8388A (18g)?
The signal word is danger.
What is the physical form of LOCTITE ABLESTIK 8388A known as Ablebond 8388A (18g)?
LOCTITE ABLESTIK 8388A known as Ablebond 8388A (18g) is a paste appearing as off white with off white color. It has slight odor.
What is LOCTITE ABLESTIK 8388A known as Ablebond 8388A (18g) used for?
Epoxy adhesive
What are the hazard statements for LOCTITE ABLESTIK 8388A known as Ablebond 8388A (18g)?
This substance has 8 hazard statements:
- H302: HARMFUL IF SWALLOWED.
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H335: MAY CAUSE RESPIRATORY IRRITATION.
- H341: SUSPECTED OF CAUSING GENETIC DEFECTS.
- H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.
- H372: CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of LOCTITE ABLESTIK 8388A known as Ablebond 8388A (18g)?
The melting point is Not applicable, Product is a liquid and the boiling point is Not applicable, Polymerizes before boiling point is reached..