NextSDS Logo
Safety Data Sheet EN

LOCTITE ABLESTIK ECF 561-1-005 known as Ablefilm ECF561-1-005

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
LOCTITE ABLESTIK ECF 561-1-005 known as Ablefilm ECF561-1-005

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

Henkel logo

Henkel

manufacturer

+1 (860) 571-5100

www.henkelina.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2
Eye Irrit. Cat. 2A
Skin Sens. Cat. 1
Repr. Cat. 2

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H315 CAUSES SKIN IRRITATION.
H317 MAY CAUSE AN ALLERGIC SKIN REACTION.
H319 CAUSES SERIOUS EYE IRRITATION.
H361 SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P261 Avoid breathing dust or fumes.
P264 Wash affected area thoroughly after handling.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves, clothing, eye and face protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical attention.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Silver 7440-22-4 60 - 80% Yes
Modified epoxy resin --- 10 - 30% Yes
Glass, oxide, chemicals 65997-17-3 10 - 30% Yes
Epoxy resin --- 0.1 - 1% Yes
4,4'-Isopropylidenediphenol 80-05-7 0.1 - 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. If symptoms develop and persist, get medical attention.

Skin contact

Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available). If symptoms develop and persist, get medical attention. Wash clothing before reuse.

Eye contact

Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.

Ingestion

DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If symptoms develop and persist, get medical attention.

Immediate Medical Attention

If symptoms develop and persist, get medical attention.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Unsuitable media

Not available.

Specific hazards

May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.

Instructions

In case of fire, keep containers cool with water spray.

Firefighter Protection

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Do not allow product to enter sewer or waterways.

Cleanup methods

Ensure adequate ventilation. Remove all sources of ignition. Wear suitable protective clothing, gloves and eye/face protection. Sweep up or gather material and place in appropriate container for disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Wear suitable protective clothing, gloves and eye/face protection. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist.

Storage

Keep in a cool, well ventilated area.

Hygiene

Wash thoroughly after handling.

Fire prevention

Keep away from heat, sparks and open flame.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Decomposition Temperature
Not available.
Physical State Data
solid
Evaporation Rate
Not determined
Solubility
Insoluble Water
Dynamic Viscosity
Not available.
Molecular Weight
---
Properties Status
---
Vapor Density
---
Bulk Density
---
Solubility In Fat
---
State Under Standard Conditions
---
Vapor Pressure
Not available.
Odor Threshold
Not available.
Explosive Limits
---
Solubility In Water
---
Crystallisation Point
---
Ph
Not available.
Cloud Point
---
Kinematic Viscosity
Not available.
Partition Coefficient
Not determined
Relative Density
3.3
Colour
Gray / Grey
Density
---
Solidification Point
---
Flash Point
> 93 °C (> 199.4 °F)
Relative Evaporation Rate
---
Flammability
Not applicable
Auto Ignition Temperature
Not available.
Form
---
Softening Point
---
Freezing Point
---
Metal Corrosion
---
Odor
Mild
Melting Point
Not determined
Upper Explosive Limit
Not available.
Appearance
---
Physical State
Solid, Film
Voc Content
< 0.1 %
Colour Intensity
---
Boiling Point
Not available.
Lower Explosive Limit
Not available.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

Will not occur.

Avoid

Elevated temperatures.

Incompatible

Strong oxidizing agents. Amines.

Decomposition

Oxides of carbon. Oxides of nitrogen. Irritating organic fragments.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3077
Shipping Name
RQ, Environmentally hazardous substance, solid, n.o.s. (Silver)
Transport Class
9
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for LOCTITE ABLESTIK ECF 561-1-005 known as Ablefilm ECF561-1-005?

The signal word is warning.

What is the physical form of LOCTITE ABLESTIK ECF 561-1-005 known as Ablefilm ECF561-1-005?

LOCTITE ABLESTIK ECF 561-1-005 known as Ablefilm ECF561-1-005 is a solid, film with gray / grey color. It has mild odor.

What is the solubility of LOCTITE ABLESTIK ECF 561-1-005 known as Ablefilm ECF561-1-005?

Insoluble Water

What are the hazard statements for LOCTITE ABLESTIK ECF 561-1-005 known as Ablefilm ECF561-1-005?

This substance has 4 hazard statements:

  • H315: CAUSES SKIN IRRITATION.
  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
  • H319: CAUSES SERIOUS EYE IRRITATION.
  • H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.

What is the melting point of LOCTITE ABLESTIK ECF 561-1-005 known as Ablefilm ECF561-1-005?

The melting point is Not determined and the boiling point is Not available..