NextSDS Logo
Safety Data Sheet EN

BONDERITE C-AK 4338LP1 AERO ALKALINE CLEANER known as TURCO 4338L PART 1

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE C-AK 4338LP1 AERO ALKALINE CLEANER known as TURCO 4338L PART 1
Product Code
790334

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Alkaline Cleaner for Industrial Application

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

CORROSIVE TO METALS Cat. 1
SKIN CORROSION Cat. 1
SERIOUS EYE DAMAGE Cat. 1

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H290 MAY BE CORROSIVE TO METALS.
H314 CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.

Precautionary Statements

P234 Keep only in original packaging.
P260 Do not breathe vapors, mist, or spray.
P264 Wash affected area thoroughly after handling.
P280 Wear protective gloves, clothing, eye and face protection.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing.
P304 + P340 + P310 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Immediately call a POISON CENTER or physician.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P363 Wash contaminated clothing before reuse.
P390 Absorb spillage to prevent material damage.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Sodium hydroxide 1310-73-2 30 - 60% Yes

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.

Skin contact

Immediately wash skin thoroughly with soap and water. If irritation persists, repeat flushing and get medical attention. Discard any shoes or clothing items that cannot be decontaminated.

Eye contact

In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.

Ingestion

Get immediate medical attention. DO NOT induce vomiting unless directed to do so by medical personnel. Give one to two glasses of water or milk. Never give anything by mouth to a victim who is unconscious or is having convulsions.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use media appropriate for surrounding material.

Unsuitable media

Not available.

Specific hazards

This product is an aqueous mixture which will not burn. May react with metals to form flammable hydrogen gas.

Instructions

Wear full protective clothing. Wear self-contained breathing apparatus.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways. Isolate area. Keep unnecessary personnel away.

Cleanup methods

Collect spilled material with an inert absorbent such as sand or vermiculite. Place in properly labeled closed container. Flush area with water to remove trace residue.

Materials: inert absorbent such as sand or vermiculite

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Provide adequate ventilation. Considerable heat is generated when water or acid is added, therefore when making solutions always add the caustic to the water or acid with constant stirring. If caustic substance or solution becomes concentrated in one area, or if added too rapidly or if added to hot or cold water a rapid temperature increase can result in dangerous boiling water and/or splashing or may cause immediate violent eruption. Do not reuse the empty container.

Storage

Keep the container tightly closed and in a cool, well-ventilated place. Protect from freezing.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Properties Status
---
Form
---
Decomposition Temperature
Not available.
Metal Corrosion
---
Kinematic Viscosity
Not available.
Lower Explosive Limit
Not available.
Vapor Pressure
20 mm hg (-6.7 °C (19.9 °F))
Solubility
Soluble Water
Upper Explosive Limit
Not available.
Partition Coefficient
Not determined
Appearance
---
Relative Evaporation Rate
---
Melting Point
Not applicable
Cloud Point
---
Density
---
Ph
13.0
Flammability
Not applicable
Boiling Point
> 200 °F (> 93.3 °C)
Colour
White
Bulk Density
---
Colour Intensity
---
Solubility In Fat
---
Solidification Point
---
Freezing Point
---
Flash Point
Not applicable
Crystallisation Point
---
Evaporation Rate
< 1
Explosive Limits
---
Physical State
Liquid
Molecular Weight
---
Dynamic Viscosity
Not available.
Odor
Odourless / Odorless
Solubility In Water
---
Auto Ignition Temperature
Not applicable
Voc Content
Not applicable
Odor Threshold
Not available.
State Under Standard Conditions
---
Relative Density
1.51
Softening Point
---
Physical State Data
liquid
Vapor Density
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Not available.

Hazardous reactions

Will not occur.

Avoid

Avoid contact with acids and oxidizing agents.

Incompatible

This product reacts with acids. Avoid contact with iron, aluminum, zinc, copper and strong bases.

Decomposition

Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1824
Shipping Name
Sodium hydroxide solution
Transport Class
8
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for BONDERITE C-AK 4338LP1 AERO ALKALINE CLEANER known as TURCO 4338L PART 1?

The signal word is danger.

What is the physical form of BONDERITE C-AK 4338LP1 AERO ALKALINE CLEANER known as TURCO 4338L PART 1?

BONDERITE C-AK 4338LP1 AERO ALKALINE CLEANER known as TURCO 4338L PART 1 is a liquid with white color. It has odourless / odorless odor.

What is the solubility of BONDERITE C-AK 4338LP1 AERO ALKALINE CLEANER known as TURCO 4338L PART 1?

Soluble Water

What is BONDERITE C-AK 4338LP1 AERO ALKALINE CLEANER known as TURCO 4338L PART 1 used for?

Alkaline Cleaner for Industrial Application

What are the hazard statements for BONDERITE C-AK 4338LP1 AERO ALKALINE CLEANER known as TURCO 4338L PART 1?

This substance has 2 hazard statements:

  • H290: MAY BE CORROSIVE TO METALS.
  • H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.

What is the melting point of BONDERITE C-AK 4338LP1 AERO ALKALINE CLEANER known as TURCO 4338L PART 1?

The melting point is Not applicable and the boiling point is > 200 °F (> 93.3 °C).