NextSDS Logo
Safety Data Sheet EN

AQUENCE LAM FIX N5000 DR-F214KG

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
AQUENCE LAM FIX N5000 DR-F214KG
Product Form
adhesive, water-based
Product Code
3001735

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Precautionary Statements

Not prescribed
Not prescribed
Not prescribed
Not prescribed

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Notes

Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If not breathing, give artificial respiration. Move to fresh air. If symptoms persist, seek medical advice.

Skin contact

Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention. Remove contaminated clothing and shoes.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Seek medical attention immediately.

Ingestion

DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Seek medical attention immediately.

Immediate Medical Attention

Seek medical attention immediately.

Medical Treatment

Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use extinguishing measures appropriate to local circumstances and the surrounding environment.

Unsuitable media

Not available.

Specific hazards

This product is an aqueous mixture which will not burn. If evaporated to dryness, the solid residue may pose a slight fire hazard.

Instructions

Keep unnecessary personnel away.

Firefighter Protection

Fire fighters should wear positive pressure self-contained breathing apparatus (SCBA).

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Do not allow material to contaminate ground water system. Do not allow product to enter sewer or waterways.

Cleanup methods

Keep unnecessary personnel away. Ensure adequate ventilation. Wear appropriate protective equipment and clothing during clean-up. Refer to Section 8 "Exposure Controls / Personal Protection" prior to clean up. Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).

Materials: sand, silica gel, acid binder, universal binder, sawdust

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling.

Storage

Do not freeze. Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use local ventilation if general ventilation is insufficient to maintain vapor concentration below established exposure limits.

Hands

Use impermeable gloves as necessary to prevent skin contact.

Eyes

Safety goggles or safety glasses with side shields. Full face protection should be used if the potential for splashing or spraying of product exists.

Respiratory

Use NIOSH approved respirator if there is potential to exceed exposure limit(s).

Skin/Body

Use protective clothing as necessary to prevent skin contact.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Flash Point
>210 °F (>98.89 °C) None
Melting Point
Not available.
Appearance
---
Properties Status
---
Freezing Point
---
Metal Corrosion
---
Softening Point
---
Colour Intensity
---
Lower Explosive Limit
Not available.
Vapor Density
---
Relative Density
0.96 - 1.08
Decomposition Temperature
Not available.
Solubility In Fat
---
Physical State
liquid
Crystallisation Point
---
Flammability
Not applicable
Solubility
Not available.
Relative Evaporation Rate
---
Cloud Point
---
Colour
Colourless / Colorless
Solidification Point
---
Kinematic Viscosity
Not available.
Upper Explosive Limit
Not available.
Vapor Pressure
Not available.
Ph
5 - 7
Odor
Neutral
State Under Standard Conditions
---
Voc Content
0 %
Evaporation Rate
Same as water.
Boiling Point
>210 °F (>98.9 °C) None
Explosive Limits
---
Dynamic Viscosity
3,250 - 4,250 cp
Physical State Data
liquid
Molecular Weight
---
Bulk Density
---
Form
---
Solubility In Water
---
Density
---
Odor Threshold
Not available.
Auto Ignition Temperature
Not available.
Partition Coefficient
Not determined
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

Will not occur.

Avoid

Do not freeze.

Incompatible

Contact with water reactive materials (such as oleum) can cause exothermic reactions.

Decomposition

Oxides of carbon. Irritating organic vapours.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for AQUENCE LAM FIX N5000 DR-F214KG?

The signal word is no signal word.

What is the physical form of AQUENCE LAM FIX N5000 DR-F214KG?

AQUENCE LAM FIX N5000 DR-F214KG is a liquid with colourless / colorless color. It has neutral odor.

What is the solubility of AQUENCE LAM FIX N5000 DR-F214KG?

Not available.

What is the melting point of AQUENCE LAM FIX N5000 DR-F214KG?

The melting point is Not available. and the boiling point is >210 °F (>98.9 °C) None.