NextSDS Logo
Safety Data Sheet EN

TEROSON MS 939NA BLACK 570ML

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TEROSON MS 939NA BLACK 570ML
Product Form
Sealant
Product Code
2069989

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Eye Irrit. Cat. 2A
Skin Sens. Cat. 1
Repr. Cat. 1B

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H317 MAY CAUSE AN ALLERGIC SKIN REACTION.
H319 CAUSES SERIOUS EYE IRRITATION.
H360 MAY DAMAGE FERTILITY OR THE UNBORN CHILD.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P261 Avoid breathing mist/vapours.
P264 Wash affected area thoroughly after handling.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves, clothing, eye and face protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical attention.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Calcium carbonate 471-34-1 30 - 60% Yes
3-(Trimethoxysilyl)propylamine 13822-56-5 1 - 5% Yes
Trimethoxyvinylsilane 2768-02-7 1 - 5% Yes
Carbon black - Nano 1333-86-4 1 - 5% Yes
Octadecanoic acid 57-11-4 0.1 - 1% Yes
Dibutoxydibutylstannane 3349-36-8 0.1 - 1% Yes
Bis(2,2,6,6-tetramethyl-4-piperidyl) sebacate 52829-07-9 0.1 - 1% Yes
Paraffins, petroleum, normal C5-20 64771-72-8 0.1 - 1% Yes

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to an area free from risk of further exposure. If symptoms develop and persist, get medical attention.

Skin contact

Wipe off with paper towel or cloth. Wash with soap and water. If symptoms develop and persist, get medical attention.

Eye contact

Flush eye(s) immediately with plenty of water. If eye irritation persists, consult a specialist.

Ingestion

Keep individual calm. Do not induce vomiting. Seek medical advice.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Unsuitable media

Not available.

Specific hazards

In case of fire, keep containers cool with water spray.

Instructions

Wear protective equipment. Wear self-contained breathing apparatus.

Firefighter Protection

Wear protective equipment. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Do not let product enter drains.

Cleanup methods

Rinse spill area with water. Spilled material will solidify. Sweep up spilled material and place in a closed container for disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Wash thoroughly after handling. Do not handle contact lenses until all sealant has been removed from hands. Residual sealant may transfer to lenses and cause eye irritation.

Storage

Store in a cool, dry, well-ventilated area.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Upper Explosive Limit
Not available.
Dynamic Viscosity
150,000 mPa.s
Cloud Point
---
Solidification Point
---
Solubility In Fat
---
Decomposition Temperature
Not available.
Flammability
Not applicable
Solubility
Insoluble Water
Appearance
---
Colour
Black
Colour Intensity
---
Vapor Pressure
Not available.
Metal Corrosion
---
Boiling Point
Not available.
Physical State Data
liquid
Vapor Density
---
Physical State
Paste, Liquid
Crystallisation Point
---
Partition Coefficient
Not available.
Relative Density
1.4
Softening Point
---
Odor Threshold
Not available.
Freezing Point
---
Explosive Limits
---
Lower Explosive Limit
Not available.
Density
---
Properties Status
---
Evaporation Rate
Not available.
Auto Ignition Temperature
Not available.
Voc Content
1.62 %
Flash Point
> 93 °C (> 199.4 °F)
Bulk Density
---
Molecular Weight
---
Relative Evaporation Rate
---
Ph
Not available.
Form
---
Kinematic Viscosity
Not available.
Melting Point
Not available.
Solubility In Water
Insoluble
State Under Standard Conditions
---
Odor
Mild
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

Will not occur.

Avoid

Extremes of temperature and direct sunlight. Heat, flames, sparks and other sources of ignition.

Incompatible

Acids and bases. Oxidizing agents.

Decomposition

Oxides of nitrogen. Oxides of carbon. Aldehydes. Irritating organic vapours. Toxic fumes.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TEROSON MS 939NA BLACK 570ML?

The signal word is danger.

What is the physical form of TEROSON MS 939NA BLACK 570ML?

TEROSON MS 939NA BLACK 570ML is a paste, liquid with black color. It has mild odor.

What is the solubility of TEROSON MS 939NA BLACK 570ML?

Insoluble Water

What are the hazard statements for TEROSON MS 939NA BLACK 570ML?

This substance has 3 hazard statements:

  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
  • H319: CAUSES SERIOUS EYE IRRITATION.
  • H360: MAY DAMAGE FERTILITY OR THE UNBORN CHILD.

What is the melting point of TEROSON MS 939NA BLACK 570ML?

The melting point is Not available. and the boiling point is Not available..