Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEROSON MS 9360 BK CR310ML ML
- Product Code
- 2969777
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesive and sealant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Calcium carbonate | 471-34-1 | 30 - 60% | Yes |
| Carbon black - Nano | 1333-86-4 | 5 - 10% | Yes |
| Bis(2,2,6,6-tetramethyl-4-piperidyl) sebacate | 52829-07-9 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Immediately remove victim to fresh air.
If skin irritation occurs: Rinse with running water and soap.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Do not rub eyes.
Symptoms: mechanical action may cause corneal damage.
Do not induce vomiting. Rinse mouth and throat.
Immediate Medical Attention
Seek medical advice.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
carbon dioxide, foam, powder, water spray jet, fine water spray
Not available.
In the event of a fire, carbon monoxide (CO) and carbon dioxide (CO2) can be released.
Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
For small spills wipe up with paper towel and place in container for disposal.
For large spills absorb onto inert absorbent material and place in sealed container for disposal.
Do not let product enter drains. Inform authorities in the event of product spillage to water courses or sewage systems.
For small spills wipe up with paper towel and place in container for disposal. For large spills absorb onto inert absorbent material and place in sealed container for disposal.
Materials: paper towel, inert absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid skin and eye contact.
Ensure adequate ventilation. Store in sealed original container. Store in a dry place.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
None if used for intended purpose.
This product may react with strong oxidizing agents. Avoid contact with amines.
No decomposition if used according to specifications.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEROSON MS 9360 BK CR310ML ML?
The signal word is warning.
What is the physical form of TEROSON MS 9360 BK CR310ML ML?
TEROSON MS 9360 BK CR310ML ML is a solid with black color. It has alcohol odor.
What is the solubility of TEROSON MS 9360 BK CR310ML ML?
Reacts with water. Water
What is TEROSON MS 9360 BK CR310ML ML used for?
Adhesive and sealant
What are the hazard statements for TEROSON MS 9360 BK CR310ML ML?
This substance has 1 hazard statement:
- H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.
What is the melting point of TEROSON MS 9360 BK CR310ML ML?
The melting point is Not applicable, Determination technically not possible and the boiling point is > 250 °C (> 482°F) Boiling point.