Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TECHNOMELT AS 292 25KG
- Product Form
- Hotmelt adhesive
- Product Code
- 1997346
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Hazardous Component(s) | CAS Number | Weight %*: Calcium distearate | 1592-23-0 | 0.1 - 1
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Calcium distearate | 1592-23-0 | 0.1 - 1% | Yes |
IDH number: 1997346 Product name: TECHNOMELT AS 292 25KG
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air, consult doctor if complaint persists.
If skin irritation occurs: Rinse with running water and soap.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. In case of adverse health effects seek medical advice. Do not rub eyes.
Symptoms: mechanical action may cause corneal damage.
Do not induce vomiting. Rinse mouth and throat. Seek medical advice.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Extinguish using agent suitable for type of surrounding fire.
High pressure waterjet
In the event of a fire, carbon monoxide (CO) and carbon dioxide (CO2) can be released.
Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel
wipe up with paper towel and place in container for disposal
absorb onto inert absorbent material and place in sealed container for disposal
Do not let product enter drains.
For small spills wipe up with paper towel and place in container for disposal. For large spills absorb onto inert absorbent material and place in sealed container for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing.
For safe storage, store between 0.0 °C (32°F) and 38.0 °C (100.4 °F)
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation/suction at the workplace.
Safety goggles or safety glasses with side shields.
In case of insufficient ventilation, wear suitable respiratory equipment.
Suitable protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Not available.
Not available.
Will not occur.
Stable under recommended storage conditions.
None if used properly.
None if used for intended purpose. None known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TECHNOMELT AS 292 25KG?
The signal word is no signal word.
What is the physical form of TECHNOMELT AS 292 25KG?
TECHNOMELT AS 292 25KG is a solid with transparent color. It has sour/acid odor.
What is the solubility of TECHNOMELT AS 292 25KG?
Insoluble Water
What are the hazard statements for TECHNOMELT AS 292 25KG?
This substance has 1 hazard statement:
- MOLTEN ADHESIVE MAY CAUSE SEVERE BURNS. VAPORS ABOVE MOLTEN ADHESIVE MAY CAUSE EYE, SKIN AND RESPIRATORY TRACT IRRITATION. STATIC CHARGES GENERATED BY EMPTYING PACKAGE IN OR NEAR FLAMMABLE VAPORS MAY CAUSE IGNITION.
What is the melting point of TECHNOMELT AS 292 25KG?
The melting point is 144 °C (291.2 °F) and the boiling point is Not applicable, Decomposes before boiling point is reached.