Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- AQUENCE WL 7021G CH TO 1180KG
- Product Form
- Water based adhesive
- Product Code
- 3012527
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608 (toll free)
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300 (toll free)
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 3,6,9-Trioxaundecane-1,11-diol | 112-60-7 | 1 - 5% | Yes |
| Urea | 57-13-6 | 0.1 - 1% | Yes |
| Potassium hydroxide | 1310-58-3 | 0.1 - 1% | Yes |
| hydrogen peroxide solution | 7722-84-1 | 0.1 - 1% | Yes |
| Distillates (petroleum), solvent-dewaxed heavy paraffinic < 3%DMSO | 64742-65-0 | 0.1 - 1% | Yes |
IDH number: 3012527 Product name: AQUENCE WL 7021G CH TO 1180KG <!-- PAGE 2 -->
First Aid Measures
Emergency procedures for chemical exposure incidents
If not breathing, give artificial respiration. Move to fresh air. If symptoms persist, seek medical advice. Move to fresh air. If breathing is difficult, give oxygen. If symptoms develop and persist, get medical attention. If not breathing, give artificial respiration.
Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention. Remove contaminated clothing and shoes. Wash affected area immediately with soap and water.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Seek medical attention immediately. Check for and remove any contact lenses. Immediately flush eyes with plenty of water for at least 15 minutes.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Seek medical attention immediately. DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If symptoms develop and persist, get medical attention.
Immediate Medical Attention
Seek medical attention immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures appropriate to local circumstances and the surrounding environment. Use media appropriate for surrounding material.
Not available.
This product is an aqueous mixture which will not burn. If evaporated to dryness, the solid residue may pose a slight fire hazard. Do not allow run-off from fire fighting to enter drains or water courses. This product is an aqueous mixture which will not burn. If evaporated to dryness, the solid residue may pose a slight fire hazard.
Fire fighters should wear positive pressure self-contained breathing apparatus (SCBA). Keep unnecessary personnel away.
Firefighter Protection
Fire fighters should wear positive pressure self-contained breathing apparatus (SCBA).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel. Keep unnecessary personnel away. Ensure adequate ventilation. Wear appropriate protective equipment and clothing during clean-up. Refer to Section 8 'Exposure Controls / Personal Protection' prior to clean up.
Small spills can be absorbed with vermiculite, clay or other suitable non-biodegradable absorbent material, scooped up and placed in containers.
For large spills dike ahead and collect liquid.
Prevent further leakage or spillage if safe to do so. Do not allow material to contaminate ground water system. Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Small spills can be absorbed with vermiculite, clay or other suitable non-biodegradable absorbent material, scooped up and placed in containers. For large spills dike ahead and collect liquid.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust), vermiculite, clay or other suitable non-biodegradable absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Do not breathe gas/fumes/vapor/spray. Keep container closed. Use only with adequate ventilation. Do not taste or swallow.
Do not freeze. Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use. Stable at normal conditions.
Not available.
Will not occur. Will not occur.
Do not freeze. Store away from incompatible materials.
Contact with water reactive materials (such as oleum) can cause exothermic reactions. Keep away from strong oxidizing agents, strong Lewis or mineral acids.
Oxides of carbon. Irritating organic vapours. Thermal decomposition can lead to release of irritating gases and vapors. Oxides of carbon. Oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for AQUENCE WL 7021G CH TO 1180KG?
The signal word is no signal word.
What is the physical form of AQUENCE WL 7021G CH TO 1180KG?
AQUENCE WL 7021G CH TO 1180KG is a liquid with green color. It has fruity odor.
What is the solubility of AQUENCE WL 7021G CH TO 1180KG?
Not available.
What is the melting point of AQUENCE WL 7021G CH TO 1180KG?
The melting point is Not available. and the boiling point is Not available..