LOCTITE EA E-60HP A RESIN

Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. If symptoms develop and persist, get medical attention.

Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. If symptoms develop and persist, get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.

Immediately flush eyes with plenty of water for at least 15 minutes. If symptoms develop and persist, get medical attention.

DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.

Water spray (fog), foam, dry chemical or carbon dioxide.

Not available.

Burning produces obnoxious and toxic fumes. Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

Isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Do not allow product to enter sewer or waterways.

Ensure adequate ventilation. Wear appropriate personal protective equipment. Refer to Section 8 "Exposure Controls / Personal Protection" prior to clean up. Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Scrape up spilled material and place in a closed container for disposal.

Materials: sand, silica gel, acid binder, universal binder, sawdust

Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Use only with adequate ventilation. Keep container closed.

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Keep away from heat, spark and flame. Protect from direct sunlight.

Wash thoroughly after handling.

Keep away from heat, spark and flame.

Use local exhaust ventilation if the potential for airborne exposure exists.

Use chemical resistant, impermeable clothing including gloves

Safety goggles or safety glasses with side shields. Full face protection should be used if the potential for splashing or spraying of product exists.

Use a NIOSH approved respirator if ventilation is inadequate.

Use chemical resistant, impermeable clothing including gloves and either an apron or body suit to prevent skin contact.

Stable under normal conditions of storage and use.

Not available.

Reaction with some curing agents may produce an exothermic reaction which in large masses could cause runaway polymerization.

Keep away from heat, ignition sources and incompatible materials. Protect from direct sunlight.

Acids. Bases. Oxidizing agents. Amines.

Oxides of carbon. Oxides of nitrogen. Aldehydes. Formaldehyde. Acids. Acrylic monomers. Phenolics. Halogenated compounds. Toxic fumes. Irritating vapors.