Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE C-IC 921 RF
- Product Code
- 2239163
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Acidic Cleaner for Industrial Application
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608 (toll free)
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300 (toll free)
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Hazardous Component(s): Phosphoric acid 10 - 30%; Nitric acid 1 - 5%
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Phosphoric acid | 7664-38-2 | 10 - 30% | Yes |
| Nitric acid | 7697-37-2 | 1 - 5% | Yes |
IDH number: 2239163 Product name: BONDERITE C-IC 921 RF
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Remove contaminated clothing and footwear. Flush with large amounts of water. Seek immediate medical attention.
Rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. DO NOT induce vomiting unless directed to do so by medical personnel. Give one to two glasses of water or milk. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Immediate Medical Attention
Seek medical attention if symptoms develop or persist (inhalation). Seek immediate medical attention (skin, eye, ingestion).
Medical Treatment
If cyanosis is severe, intravenous injection of methylene blue, 1 mg/kg body weight, may be of value. Treat the affected person appropriately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
May react with metals to form flammable hydrogen gas.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate personal protective equipment. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Do not take internally. Wash thoroughly after handling. For industrial use only. NEVER ADD WATER TO PRODUCT. For dilutions, add product slowly to water while stirring. Use caution; heat may be generated.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Heat. Contact with most metals produces highly flammable hydrogen gas.
Keep away from organic, alkaline, and oxidizing materials, metallic powders, chromates, chlorates, nitrates, and carbides. Reaction with reducing agents. Adding water to this product may cause localized overheating and splattering.
Upon decomposition, this product may yield gaseous nitrogen oxides, carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of sulfur.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3264
- Shipping Name
- Corrosive liquid, acidic, inorganic, n.o.s. (Phosphoric acid, Nitric acid)
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE C-IC 921 RF?
The signal word is danger.
What is the physical form of BONDERITE C-IC 921 RF?
BONDERITE C-IC 921 RF is a liquid with water white color.
What is BONDERITE C-IC 921 RF used for?
Acidic Cleaner for Industrial Application
What are the hazard statements for BONDERITE C-IC 921 RF?
This substance has 2 hazard statements:
- H290: MAY BE CORROSIVE TO METALS.
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
What is the melting point of BONDERITE C-IC 921 RF?
The melting point is -10 °C (14°F) calculated and the boiling point is 110 °C (230°F)calculated.