Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE S-AD RW 28406 SOLID LUBRICANT ADDITIVE ACHESON known as RW28406
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Graphite | 7782-42-5 | 10 - 30
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Graphite | 7782-42-5 | 10 - 30% | Yes |
IDH number: 1224238 Product name: BONDERITE S-AD RW 28406 SOLID LUBRICANT ADDITIVE ACHESON known as RW28406 IDH number: 1224238 Product name: BONDERITE S-AD RW 28406 SOLID LUBRICANT ADDITIVE ACHESON known as RW28406
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If symptoms persist, seek medical advice.
Immediately wash skin thoroughly with soap and water. Immediately remove soiled or soaked clothing. If irritation persists, repeat flushing and get medical attention. Discard any shoes or clothing items that cannot be decontaminated.
Immediately flush eyes with water for at least 15 minutes, while holding eyelids open. Seek medical attention at once.
Give one to two glasses of water or milk. Never give anything by mouth to an unconscious person. Do not induce vomiting. If vomiting occurs, prevent aspiration by keeping the patient's head below the knees.
Immediate Medical Attention
Immediate medical treatment necessary.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material. In case of fire, keep containers cool with water spray.
Not available.
Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
Fire fighters should wear positive pressure self-contained breathing apparatus (SCBA).
Firefighter Protection
Fire fighters should wear positive pressure self-contained breathing apparatus (SCBA).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Related Products
Similar products with comparable safety profiles
BONDERITE S-AD 1275 SOLID LUBRICANT ADDITIVE ACHESON known as SLA1275
---
BONDERITE S-AD 1720 SOLID LUBRICANT ADDITIVE ACHESON known as SLA1720
---
BONDERITE S-AD 1286 ACHESON
---
BONDERITE L-AD 2731 LUBRICANT ADDITIVE
---
BONDERITE S-AD 1246 ACHESON
---
BONDERITE L-FM F 1009 FORMING LUBRICANT ACHESON
---
BONDERITE L-FM 8100-A POST LUBRICANT ACHESON
---
BONDERITE L-FM 8100-A POST LUBRICANT ACHESON
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only in well-ventilated areas. Wear suitable protective clothing, safety glasses and gloves.
Not available.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Protect from direct sunlight. Excessive heat. Freezing conditions.
Acids. Strong oxidizing agents.
Irritating and toxic gases or fumes may be released during a fire.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE S-AD RW 28406 SOLID LUBRICANT ADDITIVE ACHESON known as RW28406?
The signal word is no signal word.
What is the physical form of BONDERITE S-AD RW 28406 SOLID LUBRICANT ADDITIVE ACHESON known as RW28406?
BONDERITE S-AD RW 28406 SOLID LUBRICANT ADDITIVE ACHESON known as RW28406 is a liquid with black color. It has ammoniacal odor.
What is the solubility of BONDERITE S-AD RW 28406 SOLID LUBRICANT ADDITIVE ACHESON known as RW28406?
Disperses in water as a suspension Water
What is BONDERITE S-AD RW 28406 SOLID LUBRICANT ADDITIVE ACHESON known as RW28406 used for?
Lubricant
What is the melting point of BONDERITE S-AD RW 28406 SOLID LUBRICANT ADDITIVE ACHESON known as RW28406?
The melting point is Not available. and the boiling point is > 100 °C (> 212°F)calculated.