NextSDS Logo
Safety Data Sheet EN

LOCTITE ABLESTIK ECF 563-005

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
LOCTITE ABLESTIK ECF 563-005
Product Code
1199232
Synonyms
Ablefilm ECF563-005

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelina.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2
Eye Irrit. Cat. 2A
Skin Sens. Cat. 1

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H315 CAUSES SKIN IRRITATION.
H317 MAY CAUSE AN ALLERGIC SKIN REACTION.
H319 CAUSES SERIOUS EYE IRRITATION.

Precautionary Statements

P261 Avoid breathing dust or fumes.
P264 Wash affected area thoroughly after handling.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves, eye protection, and face protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Hazardous Component(s) | CAS Number | Weight %*

Chemical Name CAS Number Concentration Hazardous
Silver 7440-22-4 80 - 100% Yes
Modified epoxy resin --- 5 - 10% Yes
Epoxy resin --- 5 - 10% Yes
Epoxy resin --- 1 - 5% Yes
Modified epoxy resin --- 0.1 - 1% Yes
Epoxy resin --- 0.1 - 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.

Skin contact

Wash with soap and water. If a person feels unwell or symptoms of skin irritation appear, consult a physician.

Symptoms: symptoms of skin irritation

Eye contact

In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.

Ingestion

DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person.

Immediate Medical Attention

Seek immediate medical attention for eye contact.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Unsuitable media

Not available.

Specific hazards

May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.

Instructions

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

Firefighter Protection

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Do not allow product to enter sewer or waterways.

Cleanup methods

Wear appropriate protective equipment and clothing during clean-up. Sweep up or gather material and place in appropriate container for disposal. Refer to Section 8 "Exposure Controls / Personal Protection" prior to clean up.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use only with adequate ventilation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling.

Storage

Store in a cool, dry, well-ventilated area. Store in original container until ready to use.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Colour
Gray / Grey
Voc Content
< 0.1 %
Properties Status
---
Dynamic Viscosity
Not available.
Freezing Point
---
Softening Point
---
Relative Evaporation Rate
---
Solubility
Insoluble Water
Upper Explosive Limit
Not available.
State Under Standard Conditions
---
Odor
Mild
Flammability
Noncombustible Solid in bulk form
Melting Point
Not applicable, Determination technically not possible
Bulk Density
---
Cloud Point
---
Crystallisation Point
---
Metal Corrosion
---
Colour Intensity
---
Density
---
Odor Threshold
Not available.
Vapor Density
---
Flash Point
> 100 °C (> 212°F)
Boiling Point
Not applicable, Polymerizes before boiling point is reached.
Auto Ignition Temperature
Not available.
Solidification Point
---
Molecular Weight
---
Decomposition Temperature
> 150 °C
Relative Density
4.1
Solubility In Fat
---
Explosive Limits
---
Lower Explosive Limit
Not available.
Physical State Data
solid
Kinematic Viscosity
Not available.
Solubility In Water
---
Partition Coefficient
Not available.
Appearance
---
Vapor Pressure
< 1 mbar (20 °C (68°F))
Form
---
Evaporation Rate
Not determined
Physical State
Film, Solid
Ph
Not applicable, Product is non-soluble (in water).
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

Will not occur.

Avoid

Elevated temperatures.

Incompatible

Keep away from strong oxidizing agents, strong Lewis or mineral acids.

Decomposition

Oxides of carbon and nitrogen, aldehydes, acids and undetermined organics.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3077
Shipping Name
RQ, Environmentally hazardous substance, solid, n.o.s.
Transport Class
9
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is LOCTITE ABLESTIK ECF 563-005 known by?

LOCTITE ABLESTIK ECF 563-005 is also known as: Ablefilm ECF563-005

What is the hazard signal word for LOCTITE ABLESTIK ECF 563-005?

The signal word is warning.

What is the physical form of LOCTITE ABLESTIK ECF 563-005?

LOCTITE ABLESTIK ECF 563-005 is a film, solid with gray / grey color. It has mild odor.

What is the solubility of LOCTITE ABLESTIK ECF 563-005?

Insoluble Water

What are the hazard statements for LOCTITE ABLESTIK ECF 563-005?

This substance has 3 hazard statements:

  • H315: CAUSES SKIN IRRITATION.
  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
  • H319: CAUSES SERIOUS EYE IRRITATION.

What is the melting point of LOCTITE ABLESTIK ECF 563-005?

The melting point is Not applicable, Determination technically not possible and the boiling point is Not applicable, Polymerizes before boiling point is reached..