Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE ABLESTIK 2300 known as Ablebond 2300 (33g)
- Product Code
- 1204863
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Acrylate adhesive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelina.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Silver | 7440-22-4 | 60 - 80% | Yes |
| Bismaleimide monomer | --- | 10 - 30% | Yes |
| Methacrylate resin | --- | 5 - 10% | Yes |
| Difunctional Acrylic Esters | --- | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. If symptoms develop and persist, get medical attention. Wash clothing before reuse.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Do not induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Remove all sources of ignition. Ensure adequate ventilation. Isolate area. Keep unnecessary personnel away. Soak up with inert absorbent material. Store in a closed container until ready for disposal.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
LOCTITE ABLESTIK 3230 known as Ablebond 3230 (36g)
---
LOCTITE ABLESTIK 8390 known as Ablebond 8390 (34g)
---
LOCTITE ABLESTIK 3000 known as Ablebond 3000 (3g)
---
LOCTITE ABLESTIK 8200T known as Ablebond 8200T (32g)
---
LOCTITE ABLESTIK 8360 known as Ablebond 8360 (8.5g)
---
LOCTITE ABLESTIK 8351C known as Ablebond 8351C (17.5g)
---
LOCTITE ABLESTIK 2035SC known as Ablebond 2035SC (14g)
---
LOCTITE ABLESTIK 84-3 known as Ablebond 84-3 (10.8g)
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Refer to Section 8.
Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use. Protect from direct sunlight. Maintain head space in storage containers to support oxygen requirements of the inhibitor(s).
Wash thoroughly after handling.
Keep in a cool, well ventilated area away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
High temperatures. Heat, flames, sparks and other sources of ignition. Store away from incompatible materials. Loss of polymerization inhibitor. Loss of dissolved air.
Strong oxidizing agents. Strong acids and strong bases.
Oxides of carbon. Oxides of nitrogen. Oxides of Metals in Section 3. Irritating organic vapours.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3082
- Shipping Name
- RQ, Environmentally hazardous substance, liquid, n.o.s.
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE ABLESTIK 2300 known as Ablebond 2300 (33g)?
The signal word is warning.
What is the physical form of LOCTITE ABLESTIK 2300 known as Ablebond 2300 (33g)?
LOCTITE ABLESTIK 2300 known as Ablebond 2300 (33g) is a paste with silver color. It has mild odor.
What is the solubility of LOCTITE ABLESTIK 2300 known as Ablebond 2300 (33g)?
Insoluble Water
What is LOCTITE ABLESTIK 2300 known as Ablebond 2300 (33g) used for?
Acrylate adhesive
What are the hazard statements for LOCTITE ABLESTIK 2300 known as Ablebond 2300 (33g)?
This substance has 3 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of LOCTITE ABLESTIK 2300 known as Ablebond 2300 (33g)?
The melting point is Not available. and the boiling point is Polymerization..