Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-PT 6 POST TREATMENT ADDITIVE known as PARCOLENE 6
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Additive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Phosphoric acid | 7664-38-2 | 60 - 80% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Remove contaminated clothing and footwear. Flush with large amounts of water. Seek immediate medical attention. Discard any shoes or clothing items that cannot be decontaminated.
Rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. DO NOT induce vomiting unless directed to do so by medical personnel. Give one to two glasses of water or milk. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
Not available.
Formation of toxic gases is possible during heating or in fires.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE M-PT 7100 POST TREATMENT known as PARCOLENE 7100
---
BONDERITE M-PT 350-C POST TREATMENT known as PARCOLENE 350-C
---
BONDERITE M-PT 25 POST TREATMENT known as PARCOLENE 25
---
BONDERITE M-PT ALX POST TREATMENT known as PARCOLENE ALX
---
BONDERITE M-PT 90 A POST TREATMENT known as PARCOLENE 90 A
---
BONDERITE M-PT 91 POST TREATMENT known as PARCOLENE 91
---
BONDERITE M-PT 7100 RTU POST TREATMENT known as PARCOLENE 7100 RTU
---
BONDERITE M-PT 62R CHROME POSTREATMENT known as PARCOLENE 62R
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Do not take internally. For industrial use only. Use caution when combining with water; DO NOT add water to acid, ALWAYS add acid to water while stirring to prevent release of heat, steam and fumes.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
This product may react with strong alkalies.
None under normal processing.
Store away from incompatible materials.
Adding water to this product may cause localized overheating and splattering.
Oxides of phosphorus.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1805
- Shipping Name
- Phosphoric acid solution
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE M-PT 6 POST TREATMENT ADDITIVE known as PARCOLENE 6?
The signal word is danger.
What is the physical form of BONDERITE M-PT 6 POST TREATMENT ADDITIVE known as PARCOLENE 6?
BONDERITE M-PT 6 POST TREATMENT ADDITIVE known as PARCOLENE 6 is a liquid with colourless / colorless color. It has odorless odor.
What is the solubility of BONDERITE M-PT 6 POST TREATMENT ADDITIVE known as PARCOLENE 6?
Miscible Water
What is BONDERITE M-PT 6 POST TREATMENT ADDITIVE known as PARCOLENE 6 used for?
Additive
What are the hazard statements for BONDERITE M-PT 6 POST TREATMENT ADDITIVE known as PARCOLENE 6?
This substance has 2 hazard statements:
- H290: MAY BE CORROSIVE TO METALS.
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
What is the melting point of BONDERITE M-PT 6 POST TREATMENT ADDITIVE known as PARCOLENE 6?
The melting point is Not applicable, Product is a liquid and the boiling point is > 135 °C (> 275°F).