Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE TYFO ANCHOR CARBON 0.50
- Product Code
- 3013475
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Carbon fiber cloth
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. If symptoms develop and persist, get medical attention.
Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available). Wash contaminated clothing before reuse. If symptoms develop and persist, get medical attention.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Seek medical attention immediately.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If symptoms develop and persist, get medical attention.
Immediate Medical Attention
Seek medical attention immediately (for eye contact). If symptoms develop and persist, get medical attention (for inhalation, skin, ingestion).
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide. Use extinguishing measures appropriate to local circumstances and the surrounding environment.
Not available.
In case of fire, keep containers cool with water spray.
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear. Keep unnecessary personnel away. In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Sweep up or gather material and place in appropriate container for disposal.
Related Products
Similar products with comparable safety profiles
LOCTITE TYFO ANCHOR CARBON 0.75
---
LOCTITE TYFO ANCHOR CARBON .875
---
LOCTITE TYFO ANCHOR CARBON .250
---
LOCTITE TYFO ANCHOR CARBON 0.500"X20" FYFE
---
LOCTITE TYFO ANCHOR GLASS 0.250
---
LOCTITE TYFO ANCHOR GLASS 1.250
---
LOCTITE TYFO SCH-41S-2X CARBON
---
LOCTITE TYFO HCR GY PART A5 GAL
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only in well-ventilated areas. Wear suitable protective clothing, gloves and eye/face protection. Wash thoroughly after handling. When using do not eat, drink or smoke.
Store in a cool, dry, well-ventilated area.
Wash thoroughly after handling. When using do not eat, drink or smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate local exhaust ventilation to maintain worker exposure below exposure limits.
Chemical resistant, impermeable gloves.
Safety goggles or safety glasses with side shields.
Under normal conditions, respirator is not normally required.
Chemical resistant, impermeable gloves.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
Excessive heat. Store away from incompatible materials.
Strong oxidizing agents.
Oxides of carbon. Oxides of silicon. Thermal decomposition can lead to release of irritating gases and vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE TYFO ANCHOR CARBON 0.50?
The signal word is no signal word.
What is the physical form of LOCTITE TYFO ANCHOR CARBON 0.50?
LOCTITE TYFO ANCHOR CARBON 0.50 is a solid with black color. It has odourless / odorless odor.
What is the solubility of LOCTITE TYFO ANCHOR CARBON 0.50?
Not available.
What is LOCTITE TYFO ANCHOR CARBON 0.50 used for?
Carbon fiber cloth
What is the melting point of LOCTITE TYFO ANCHOR CARBON 0.50?
The melting point is Not applicable and the boiling point is Not applicable.