NextSDS Logo
Safety Data Sheet EN

BONDERITE L-FM 51SC ACHESON BUL

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE L-FM 51SC ACHESON BUL
Product Code
1770709

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2
Skin Irrit. Cat. 2
Eye Irrit. Cat. 2A
Carc. Cat. 2
STOT SE Cat. 3
STOT RE Cat. 2
Asp. Tox. Cat. 1

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H225 HIGHLY FLAMMABLE LIQUID AND VAPOR.
H304 MAY BE FATAL IF SWALLOWED AND ENTERS AIRWAYS.
H315 CAUSES SKIN IRRITATION.
H319 CAUSES SERIOUS EYE IRRITATION.
H335 MAY CAUSE RESPIRATORY IRRITATION.
H336 MAY CAUSE DROWSINESS OR DIZZINESS.
H351 SUSPECTED OF CAUSING CANCER.
H372 MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P210 Keep away from heat, sparks, open flames, hot surfaces - no smoking.
P233 Keep container tightly closed.
P233 Keep container tightly closed.
P235 Keep cool.
P241 Use explosion-proof equipment.
P242 Use non-sparking tools.
P243 Take action to prevent static discharges.
P261 Do not breathe vapors, mist, or spray.
P264 Wash affected area thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P273 No release into water.
P280 Wear protective gloves, clothing, eye and face protection.
P301 + P310 IF SWALLOWED: Immediately call a physician or poison control center.
P304 + P341 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical attention.
P312 Call a POISON CENTER or physician if you feel unwell.
P331 Do NOT induce vomiting.
P332 + P313 If skin irritation occurs: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention.
P361 If on skin (or hair): Take off immediately all contaminated clothing.
P362 Take off contaminated clothing.
P370 + P378 In case of fire: Use foam, dry chemical or carbon dioxide to extinguish.
P403 Store in a well-ventilated place.
P403 Store in a well-ventilated place.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Methyl ethyl ketone 78-93-3 20 - 30% Yes
Xylenes 1330-20-7 10 - 20% Yes
Methyl isobutyl ketone 108-10-1 5 - 10% Yes
Solvent naphtha (petroleum), light arom., <0.1% Benzene 64742-95-6 5 - 10% Yes
ethyl lactate 97-64-3 1 - 5% Yes
1,2,4-Trimethylbenzene 95-63-6 1 - 5% Yes
Aluminum 7429-90-5 1 - 5% Yes
Naphtha (petroleum), hydrotreated heavy (<0.1% benzene) 64742-48-9 1 - 5% Yes
Cumene 98-82-8 0.1 - 1% Yes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.

Skin contact

For skin contact, flush with large amounts of water. Seek immediate medical attention.

Eye contact

In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.

Ingestion

DO NOT induce vomiting unless directed to do so by medical personnel. Get medical attention.

Immediate Medical Attention

Seek immediate medical attention.

Medical Treatment

Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use media appropriate for surrounding material.

Specific hazards

Formation of toxic gases is possible during heating or in fires.

Instructions

Wear self-contained breathing apparatus. Wear protective equipment.

Firefighter Protection

Wear self-contained breathing apparatus. Wear protective equipment.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Do not empty into drains / surface water / ground water.

Cleanup methods

Take up with liquid-absorbing material (sand).

Materials: liquid-absorbing material (sand)

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid skin and eye contact. Avoid breathing vapors or mists of this product. Wear protective equipment. Wash thoroughly after handling. Do not take internally. For industrial use only.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Melting Point
---
Evaporation Rate
---
Appearance
---
Vapor Pressure
---
Form
---
Crystallisation Point
---
Density
---
Relative Evaporation Rate
---
Solubility In Fat
---
Metal Corrosion
---
Flash Point
-1 °C (30.2 °F) no method
Softening Point
---
Vapor Density
---
Boiling Point
---
Kinematic Viscosity
---
Physical State Data
liquid
Solubility
---
Voc Content
---
Upper Explosive Limit
---
Flammability
Not applicable
Relative Density
---
Auto Ignition Temperature
---
State Under Standard Conditions
---
Partition Coefficient
---
Freezing Point
---
Physical State
liquid
Solidification Point
---
Explosive Limits
---
Properties Status
---
Odor Threshold
---
Lower Explosive Limit
---
Ph
---
Colour
Black
Decomposition Temperature
---
Cloud Point
---
Molecular Weight
---
Dynamic Viscosity
---
Colour Intensity
---
Bulk Density
---
Odor
Solvent
Solubility In Water
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Keep away from heat, ignition sources and incompatible materials.

Incompatible

Reaction with strong oxidants.

Decomposition

Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1993
Shipping Name
Flammable liquid, n.o.s. (Methyl ethyl ketone, Xylene)
Transport Class
3
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for BONDERITE L-FM 51SC ACHESON BUL?

The signal word is danger.

What is the physical form of BONDERITE L-FM 51SC ACHESON BUL?

BONDERITE L-FM 51SC ACHESON BUL is a liquid with black color. It has solvent odor.

What are the hazard statements for BONDERITE L-FM 51SC ACHESON BUL?

This substance has 8 hazard statements:

  • H225: HIGHLY FLAMMABLE LIQUID AND VAPOR.
  • H304: MAY BE FATAL IF SWALLOWED AND ENTERS AIRWAYS.
  • H315: CAUSES SKIN IRRITATION.
  • H319: CAUSES SERIOUS EYE IRRITATION.
  • H335: MAY CAUSE RESPIRATORY IRRITATION.
  • H336: MAY CAUSE DROWSINESS OR DIZZINESS.
  • H351: SUSPECTED OF CAUSING CANCER.
  • H372: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.