Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEROSON EP 5065 COMP B
- Product Code
- 2751614
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Epoxy Hardener
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Poly(oxy-1,4-butanediyl), a-hydro-whydroxy-, polymer with ammonia | 960525-56-8 | 10 - 30% | Yes |
| 4,4'-Methylenebis(cyclohexylamine) | 1761-71-3 | 10 - 30% | Yes |
| Formaldehyde, polymer with benzenamine, hydrogenated | 135108-88-2 | 10 - 30% | Yes |
| Polypropylene glycol diamine (MW=230) | 9046-10-0 | 10 - 30% | Yes |
| 1,3-bis[3-(dimethylamino)propyl]urea | 52338-87-1 | 1 - 5% | Yes |
| 3-Aminopropyl dimethylamine | 109-55-7 | 1 - 5% | Yes |
| Silane, dichlorodimethyl-, reaction products with silica | 68611-44-9 | 1 - 5% | Yes |
| Polyamide resin | 68410-23-1 | 1 - 5% | Yes |
| Talc | 14807-96-6 | 1 - 5% | Yes |
| Amines, polyethylenepoly-, triethylenetetramine fraction | 90640-67-8 | 0.1 - 1% | Yes |
IDH number: 2751614 Product name: TEROSON EP 5065 COMP B
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available). Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
Get medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Ensure adequate ventilation. Wear appropriate personal protective equipment. Refer to Section 8 "Exposure Controls / Personal Protection" prior to clean up. Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Scrape up spilled material and place in a closed container for disposal.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Use only with adequate ventilation. Keep container closed.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Keep away from heat, spark and flame. Store in original container until ready to use.
Wash thoroughly after handling.
Keep away from heat, spark and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials.
Strong oxidizing agents. Strong acids. CAUTION! N-nitrosamines (many of which are known to be potent carcinogens) may be formed when the product comes in contact with nitrous acid, nitrites or atmospheres with high nitrous oxide concentrations. Sodium hypochlorite. This product slowly corrodes copper, aluminum, zinc and galvanized surfaces. Reaction with peroxides may result in violent decomposition of peroxide possibly creating an explosion. Aldehydes.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen. Nitric acid. Ammonia. Nitrosamines. Amines. Phenolics. Ketones. Aldehydes. Toxic fumes. Irritating vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3259
- Shipping Name
- Amines, solid, corrosive, n.o.s. (Polyether amine, 4,4-methylenebis-cyclohexylamine, Polyoxy propylene diamine)
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEROSON EP 5065 COMP B?
The signal word is danger.
What is the physical form of TEROSON EP 5065 COMP B?
TEROSON EP 5065 COMP B is a paste with gray color. It has characteristic odor.
What is TEROSON EP 5065 COMP B used for?
Epoxy Hardener
What are the hazard statements for TEROSON EP 5065 COMP B?
This substance has 3 hazard statements:
- H302: HARMFUL IF SWALLOWED.
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
What is the melting point of TEROSON EP 5065 COMP B?
The melting point is Not applicable, Product is a liquid and the boiling point is Not applicable, Decomposes before boiling point is reached.