Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE 5113 THREAD SEALANT known as LOCTITE® Thread Sealant With P
- Product Code
- 1527514
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Sealant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-Propanol | 67-63-0 | 30 - 60% | Yes |
| Talc | 14807-96-6 | 10 - 30% | Yes |
| Titanium dioxide | 13463-67-7 | 1 - 5% | Yes |
| Ethene, tetrafluoro-, homopolymer | 9002-84-0 | 1 - 5% | Yes |
| Quartz (SiO2), <1% respirable | 14808-60-7 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. Wash clothing before reuse. Get medical attention.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Do not induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Do not use high volume water jet.
In case of fire, keep containers cool with water spray.
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel. Evacuate and ventilate spill area; dike spill to prevent entry into water system; wear full protective equipment during clean-up.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material. Scrape up as much material as possible.
Materials: sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
LOCTITE 565 LOW STRENGTH THREAD SEALANT known as LOCTITE® 565™ THREAD SEALANT P
---
LOCTITE 586 THREAD SEALANT
---
LOCTITE 5117 THREAD SEALANT known as LOCTITE® PIPE JOINT COMPOUND 1
---
LOCTITE 567 LOW STRENGTH THREAD SEALANT known as LOCTITE® 567™ THREAD SEALANT/P
---
LOCTITE IS 5110 PNTR SEAL known as Loctite(R) 5110 Adhesive Seala
---
LOCTITE® 564™ THREAD SEALANT
---
LOCTITE® PNEUMATIC/HYDRAULIC THREAD SEALANT 545™
---
LOCTITE 542 known as 542 THREAD SEALANT 250ML
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Refer to Section 8.
Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
Wash thoroughly after handling.
Keep in a cool, well ventilated area away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
Heat, flames, sparks and other sources of ignition. Store away from incompatible materials. Avoid dust formation.
Oxidizing agents. Acids. Aldehydes. Amines. Isocyanates. Halogens. Iron. Chlorine. Alkalis. Aluminum.
Toxic fluorides. Oxides of carbon. Acrid smoke and fumes.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1866
- Shipping Name
- Resin solution
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE 5113 THREAD SEALANT known as LOCTITE® Thread Sealant With P?
The signal word is warning.
What is the physical form of LOCTITE 5113 THREAD SEALANT known as LOCTITE® Thread Sealant With P?
LOCTITE 5113 THREAD SEALANT known as LOCTITE® Thread Sealant With P is a paste with white color. It has alcohol odor.
What is the solubility of LOCTITE 5113 THREAD SEALANT known as LOCTITE® Thread Sealant With P?
Partially soluble Water
What is LOCTITE 5113 THREAD SEALANT known as LOCTITE® Thread Sealant With P used for?
Sealant
What are the hazard statements for LOCTITE 5113 THREAD SEALANT known as LOCTITE® Thread Sealant With P?
This substance has 4 hazard statements:
- H226: FLAMMABLE LIQUID AND VAPOUR.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H335: MAY CAUSE RESPIRATORY IRRITATION.
- H336: MAY CAUSE DROWSINESS OR DIZZINESS.
What is the melting point of LOCTITE 5113 THREAD SEALANT known as LOCTITE® Thread Sealant With P?
The melting point is Not determined and the boiling point is 82 °C (179.6 °F).