Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEROSON RB 2800 540X100X1,05 known as TRC 2800 540x100x1,05mm 80CON-N Reinforcing Material
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Reinforcing Material
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Limestone | 1317-65-3 | 30 - 60% | Yes |
| Epichlorohydrin-4,4'-isopropylidene diphenol resin | 25068-38-6 | 10 - 30% | Yes |
| Phenol, 4,4'-(1-methylethylidene)bis-, polymer with 2,2'-(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bis[oxirane] | 25036-25-3 | 1 - 5% | Yes |
| Asphalt | 8052-42-4 | 1 - 5% | Yes |
| C,C'-azodi(formamide) | 123-77-3 | 1 - 5% | Yes |
| oxirane, mono[(C12-14-alkyloxy)methyl] derivs. | 68609-97-2 | 1 - 5% | Yes |
| Carbon black - Nano | 1333-86-4 | 0.1 - 1% | Yes |
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Get immediate medical attention. Do not induce vomiting.
Immediate Medical Attention
Get immediate medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
In case of fire toxic gases can be released.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: Inert material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Do not breathe fumes or dust from this material. Use only with adequate ventilation. Do not take internally. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None identified.
Avoid moisture.
None if used for intended purpose.
In case of fire toxic gases can be released.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEROSON RB 2800 540X100X1,05 known as TRC 2800 540x100x1,05mm 80CON-N Reinforcing Material?
The signal word is danger.
What is the physical form of TEROSON RB 2800 540X100X1,05 known as TRC 2800 540x100x1,05mm 80CON-N Reinforcing Material?
TEROSON RB 2800 540X100X1,05 known as TRC 2800 540x100x1,05mm 80CON-N Reinforcing Material is a paste with black color. It has typical odor.
What is the solubility of TEROSON RB 2800 540X100X1,05 known as TRC 2800 540x100x1,05mm 80CON-N Reinforcing Material?
Insoluble Water
What is TEROSON RB 2800 540X100X1,05 known as TRC 2800 540x100x1,05mm 80CON-N Reinforcing Material used for?
Reinforcing Material
What are the hazard statements for TEROSON RB 2800 540X100X1,05 known as TRC 2800 540x100x1,05mm 80CON-N Reinforcing Material?
This substance has 4 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
What is the melting point of TEROSON RB 2800 540X100X1,05 known as TRC 2800 540x100x1,05mm 80CON-N Reinforcing Material?
The melting point is Not applicable, Determination technically not possible and the boiling point is Not applicable, Polymerizes before boiling point is reached..