Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEROSON EV 3D CJ54S313A80BDN
- Product Code
- 2556213
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Preformed part
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates, petroleum, steam-cracked, polymd. | 68131-77-1 | 10 - 30% | Yes |
| Aluminium hydroxide | 21645-51-2 | 10 - 30% | Yes |
| Paraffin waxes and Hydrocarbon waxes | 8002-74-2 | 10 - 30% | Yes |
| 4,4'-Oxydi(benzenesulphonohydrazide) | 80-51-3 | 1 - 5% | Yes |
| Zinc oxide | 1314-13-2 | 1 - 5% | Yes |
| C,C'-azodi(formamide) | 123-77-3 | 0.1 - 1% | Yes |
| bis(α, α-dimethylbenzyl)peroxide | 80-43-3 | 0.1 - 1% | Yes |
| Vinyl acetate | 108-05-4 | 0.1 - 1% | Yes |
| Carbon black - Nano | 1333-86-4 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air, consult doctor if complaint persists.
Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention. Immediately remove soiled or soaked clothing.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Rinse the mouth. Drink 1-2 glasses of water.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
None expected.
Wear full protective clothing. Wear self contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing fumes if this product is used at high temperatures. Use only with adequate ventilation. Do not take internally. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
No decomposition if stored and applied as directed.
None if used properly.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3077
- Shipping Name
- RQ, Environmentally hazardous substance, solid, n.o.s.
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEROSON EV 3D CJ54S313A80BDN?
The signal word is danger.
What is the physical form of TEROSON EV 3D CJ54S313A80BDN?
TEROSON EV 3D CJ54S313A80BDN is a solid with black color. It has characteristic odor.
What is the solubility of TEROSON EV 3D CJ54S313A80BDN?
Not available.
What is TEROSON EV 3D CJ54S313A80BDN used for?
Preformed part
What are the hazard statements for TEROSON EV 3D CJ54S313A80BDN?
This substance has 7 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
- H351: SUSPECTED OF CAUSING CANCER.
- H360: MAY DAMAGE FERTILITY OR THE UNBORN CHILD.
- H373: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of TEROSON EV 3D CJ54S313A80BDN?
The melting point is Not available. and the boiling point is Not available..