Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE EA 960F AERO PART B 50GR KIT
- Product Code
- 1516408
- Synonyms
- EA 960F Part B 50G Pudding Cup
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Epoxy Hardener
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS06
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Fatty acids, C18 unsaturated, dimers, polymers with tall oil fatty acids and triethylenetetramine | 68082-29-1 | 30 - 60% | Yes |
| Talc | 14807-96-6 | 10 - 30% | Yes |
| Diethylenetriamine | 111-40-0 | 5 - 10% | Yes |
| 2-Ethyl-4-methylimidazole | 931-36-2 | 5 - 10% | Yes |
| Phenol | 108-95-2 | 1 - 5% | Yes |
| Amines, polyethylenepoly-, triethylenetetramine fraction | 90640-67-8 | 1 - 5% | Yes |
| Titanium dioxide < 1% particles with diameter ≤ 10 μm | 13463-67-7 | 1 - 5% | Yes |
| Quartz (SiO2) | 14808-60-7 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention.
Remove contaminated clothing and footwear. Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. Do not induce vomiting. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel
Prevent further leakage or spillage if safe to do so. Do not allow product to enter sewer or waterways.
Scrape up spilled material and place in a closed container for disposal.
Related Products
Similar products with comparable safety profiles
LOCTITE EA 9321 AERO PART B 20GR KIT
---
LOCTITE EA 9321 AERO PART A 20GR KIT
---
LOCTITE EA 9309.2NA AERO PART B 427GR KIT
---
LOCTITE EA 9377 AERO PART A 25GR
---
LOCTITE EA 9396C-2 AERO PART A 50GR KIT known as EA 9396/C2 PART A 50G P UD CUP
---
LOCTITE EA 9394.2 AERO PART B 100GR KIT known as EA 9394.2 PART B 100G E -Z PAK
---
LOCTITE EA 9394 AERO PART A 50GR KIT known as EA 9394 PART A 50G PUD.CUP
---
LOCTITE EA 9695 080K AERO
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Do not breathe fumes or dust from this material. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ventilation should effectively remove and prevent buildup of any dust generated from the handling of this product.
Wear impervious gloves for prolonged contact.
Safety goggles or safety glasses with side shields.
If ventilation is not sufficient to effectively prevent buildup of dust, appropriate NIOSH/MSHA respiratory protection must be provided.
Use of impervious apron and boots are recommended.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Keep away from heat, ignition sources and incompatible materials. Avoid mixing resin (Part A) and curing agent (Part B) unless you plan to use immediately. Failure to observe these precautions may result in excessive heat build-up causing an exotherm.
This product may react with strong acids, bases and oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3259
- Shipping Name
- Polyamines, solid, corrosive, n.o.s. (Diethylenetriamine, Triethylenetetramine)
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is LOCTITE EA 960F AERO PART B 50GR KIT known by?
LOCTITE EA 960F AERO PART B 50GR KIT is also known as: EA 960F Part B 50G Pudding Cup
What is the hazard signal word for LOCTITE EA 960F AERO PART B 50GR KIT?
The signal word is danger.
What is the physical form of LOCTITE EA 960F AERO PART B 50GR KIT?
LOCTITE EA 960F AERO PART B 50GR KIT is a solid with white color. It has amine odor.
What is the solubility of LOCTITE EA 960F AERO PART B 50GR KIT?
low solubility Water
What is LOCTITE EA 960F AERO PART B 50GR KIT used for?
Epoxy Hardener
What are the hazard statements for LOCTITE EA 960F AERO PART B 50GR KIT?
This substance has 7 hazard statements:
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H331: TOXIC IF INHALED.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
- H341: SUSPECTED OF CAUSING GENETIC DEFECTS.
- H350: MAY CAUSE CANCER.
- H373: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of LOCTITE EA 960F AERO PART B 50GR KIT?
The melting point is < -40 °C (< -40°F) and the boiling point is > 200 °C (> 392°F).