NextSDS Logo
Safety Data Sheet EN

TEROSON PU 6700 A known as TEROMIX 6700 KOMP.A DK310ML

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TEROSON PU 6700 A known as TEROMIX 6700 KOMP.A DK310ML
Product Code
156664

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Part A for 2-K-Polyurethane adhesive and sealant

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Eye Irrit. Cat. 2A H319

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H319 CAUSES SERIOUS EYE IRRITATION.

Precautionary Statements

P264 Wash affected area thoroughly after handling.
P280 Wear eye and face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337 + P313 If eye irritation persists: Get medical attention.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Calcium carbonate 471-34-1 10 - 30% Yes
1,2-Ethanediamine, polymer with methyloxirane > 1 - < 5,5 mol PO 25214-63-5 10 - 30% Yes
Limestone 1317-65-3 10 - 30% Yes
Zeolites - synthetic 1318-02-1 5 - 10% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.

Skin contact

Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.

Ingestion

Never give anything by mouth to an unconscious person. Get medical attention.

Immediate Medical Attention

Get medical attention.

Medical Treatment

Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Unsuitable media

Not available.

Specific hazards

Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.

Instructions

In case of fire, keep containers cool with water spray.

Firefighter Protection

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

isolate the hazard area and deny entry to unnecessary and unprotected personnel

Environmental

Do not allow product to enter sewer or waterways.

Cleanup methods

Soak up with inert absorbent material. Scrape up as much material as possible.

Materials: sand, silica gel, acid binder, universal binder, sawdust

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use only with adequate ventilation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Keep container closed. Refer to Section 8. For industrial use only.

Storage

Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.

Hygiene

Wash thoroughly after handling.

Fire prevention

Keep in a cool, well ventilated area away from heat, sparks and open flame.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Solid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Beige
Colour Intensity
---
Form
paste
Odor
Odourless / Odorless
Odor Threshold
Not available.
Ph
Not applicable, Product reacts with water.
Melting Point
Not applicable, Determination technically not possible
Boiling Point
Not applicable, Decomposes > 140°C (284°F).
Flash Point
> 110 °C (> 230°F) no method / method unknown
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
< 0.1 hPa (20 °C (68°F))
Vapor Density
---
Relative Density
1.4300
Bulk Density
---
Density
---
Flammability
The product is not flammable.
Upper Explosive Limit
Not available.
Lower Explosive Limit
Not available.
Explosive Limits
---
Auto Ignition Temperature
Not applicable
Decomposition Temperature
Not available.
Solubility
Insoluble Water
Partition Coefficient
Not available.
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
0 %
Metal Corrosion
---
Dynamic Viscosity
28 - 32 Pa*s; 28.00 - 32.00 mPa.s
Kinematic Viscosity
Not available.
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Elevated temperatures. Heat, flames, sparks and other sources of ignition. Store away from incompatible materials.

Incompatible

None if used for intended purpose.

Decomposition

Oxides of carbon. Irritating vapors.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TEROSON PU 6700 A known as TEROMIX 6700 KOMP.A DK310ML?

The signal word is warning.

What is the physical form of TEROSON PU 6700 A known as TEROMIX 6700 KOMP.A DK310ML?

TEROSON PU 6700 A known as TEROMIX 6700 KOMP.A DK310ML is a solid with beige color. It has odourless / odorless odor.

What is the solubility of TEROSON PU 6700 A known as TEROMIX 6700 KOMP.A DK310ML?

Insoluble Water

What is TEROSON PU 6700 A known as TEROMIX 6700 KOMP.A DK310ML used for?

Part A for 2-K-Polyurethane adhesive and sealant

What are the hazard statements for TEROSON PU 6700 A known as TEROMIX 6700 KOMP.A DK310ML?

This substance has 1 hazard statement:

  • H319: CAUSES SERIOUS EYE IRRITATION.

What is the melting point of TEROSON PU 6700 A known as TEROMIX 6700 KOMP.A DK310ML?

The melting point is Not applicable, Determination technically not possible and the boiling point is Not applicable, Decomposes > 140°C (284°F)..