Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE EA 9891RP AERO PART B 55GAL
- Product Code
- AB9340025
- Synonyms
- EA 9891RP PART B 55 GALLON
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Part B of 2-Component Epoxy Adhesive.
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 4-tert-butylphenol | 98-54-4 | 30 - 60% | Yes |
| 2,2,4(or 2,4,4)-trimethylhexane-1,6-diamine | 25513-64-8 | 10 - 30% | Yes |
| m-Phenylenebis(methylamine) | 1477-55-0 | 10 - 30% | Yes |
| 4-nonylphenol, branched | 84852-15-3 | 1 - 5% | Yes |
| Isopentane | 78-78-4 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention.
Remove contaminated clothing and footwear. Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. Do not induce vomiting. Never give anything by mouth to an unconscious person.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear. Cartridge respirators do not provide adequate protection for fire fighters or exotherm mitigation.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Do not allow product to enter sewer or waterways.
Scrape up spilled material and place in a closed container for disposal.
Related Products
Similar products with comparable safety profiles
LOCTITE EA 9392 AERO PART B 55GAL
---
LOCTITE EA 9380 AERO PART A 55GAL
---
LOCTITE EA 9394 AERO PART A 5GAL
---
LOCTITE EA 9313 AERO PART A 5GAL known as EA 9313 PART A 5 GALLON
---
LOCTITE EA 9359.3 AERO PART B 5GAL known as EA 9359.3 PART B 5 GALLON
---
LOCTITE EA 9330 AERO PART B 8OZ
---
LOCTITE EA 9394.2 AERO PART A 200ML
---
LOCTITE EA 9359.3 AERO PART A 50ML
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. For the Part A plus Part B adhesive mixture, follow curing schedule as recommended in product literature. Do not heat Part B at temperatures greater than 100 °C (212 °F). This material may self-react at higher temperatures and cause an exotherm. The exotherm has the potential for release of excessive energy and toxic gasses. Empty containers retain product residue, so obey hazard warnings and handle empty containers as if they were full. Do not cut, grind, weld, or drill on or near this container.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
May occur.
Do not mix in batches greater than 200 grams (0.44 pounds) unless you plan to use immediately. Do not heat mixed adhesive unless curing surfaces to be bonded. Failure to observe these precautions may result in excessive heat build-up causing an exotherm.
Keep away from strong oxidizing agents, strong Lewis or mineral acids.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1759
- Shipping Name
- Corrosive solids, n.o.s. (m-Xylylenediamine)
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is LOCTITE EA 9891RP AERO PART B 55GAL known by?
LOCTITE EA 9891RP AERO PART B 55GAL is also known as: EA 9891RP PART B 55 GALLON
What is the hazard signal word for LOCTITE EA 9891RP AERO PART B 55GAL?
The signal word is danger.
What is the physical form of LOCTITE EA 9891RP AERO PART B 55GAL?
LOCTITE EA 9891RP AERO PART B 55GAL is a solid with white color. It has amine-like odor.
What is the solubility of LOCTITE EA 9891RP AERO PART B 55GAL?
low solubility Water
What is LOCTITE EA 9891RP AERO PART B 55GAL used for?
Part B of 2-Component Epoxy Adhesive.
What are the hazard statements for LOCTITE EA 9891RP AERO PART B 55GAL?
This substance has 4 hazard statements:
- H302: HARMFUL IF SWALLOWED.
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.
What is the melting point of LOCTITE EA 9891RP AERO PART B 55GAL?
The melting point is < -40 °C (< -40°F) and the boiling point is > 200 °C (> 392°F).