Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- JOOP STOOP LITHOGRAPHIC INK
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Printing inks
Manufacturers & Suppliers
JOOP STOOP HOLLAND BV
manufacturer
PB 782, 7400 AT Deventer - Holland
+31570677712
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (petroleum), acid-treated middle EC: 265-113-1 | 64742-13-8 | 5 - 10% | Yes |
| Aliphatic, cycloparaffinic. aromatic hydrocarbons | --- | 2.5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove contaminated clothing immediately. Wash skin thoroughly with soap and water or use recognised skin cleanser.
Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart. Remove contact lenses.
Keep at rest. Do NOT induce vomiting.
Immediate Medical Attention
If accidentally swallowed obtain immediate medical attention! Seek medical advice (for eye contact).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol resistant foam, CO2, powders, water spray, if applied under high pressure.
Waterjet.
Exposure to hazardous decomposition products may cause a health hazard. Fire will produce dense black smoke.
Cool closed containers exposed to fire with water spray.
Firefighter Protection
Appropriate breathing apparatus may be required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate the area. Refer to protective measures listed in section 7 and 8.
If the product contaminates rivers and lakes or sewage’s inform respective authorities. Do not allow to enter drains.
Clean preferably with a detergent. Avoid use of solvents.
Materials: detergent
Related Products
Similar products with comparable safety profiles
BRILLIANT SILVER LITHO/ETCHING INK
---
OPAQUE WHITE LITHO INK
---
OPAQUE WHITE LITHO INK
---
CHARBONNEL ENCRE LITHO POUR DESSINER / LITHO AUTOGRAPHIC INK
---
ARCHIVAL WARM RED LITHO INK
---
ARCHIVAL PROCESS BLACK LITHO INK
---
LEFRANC BOURGEOIS CHARBONNEL ETCHING INK P3
---
ARCHIVAL GRASS GREEN LITHO INK
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
For personal protection see section 8. Comply with health and safety at work laws. Avoid skin and eye contact. Avoid breathing vapours.
Store in a dry, well ventilated place. Keep away from heat and direct sunlight.
Smoking, eating and drinking should be prohibited in application area.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation.
Barrier creams may help to protect the exposed areas of the skin, they should however not be applied once exposure has occurred. For prolonged or repeated contact use protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material) on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
not necessary
Working clothes must not consist of textiles, which show a dangerous melting behaviour in case of fire.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage and handling conditions (see section 7).
Exothermic reactions
High temperatures
oxidising agents, strongly alkaline and strongly acid materials
carbon dioxide, carbon monoxide, smoke, oxides of nitrogen (NOx)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for JOOP STOOP LITHOGRAPHIC INK?
The signal word is no signal word.
What is the physical form of JOOP STOOP LITHOGRAPHIC INK?
JOOP STOOP LITHOGRAPHIC INK is a highly viscous with depends on used pigment color. It has weak, characteristic odor.
What is JOOP STOOP LITHOGRAPHIC INK used for?
Printing inks
What are the hazard statements for JOOP STOOP LITHOGRAPHIC INK?
This substance has 1 hazard statement:
- The product does not have to be labelled due to the calculation procedure of the "General Classification guideline for preparations of the EU" in the latest valid version.