Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Caparol Amphibolin
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Water-borne coatings
Uses advised against
within adequate application - none on use
Manufacturers & Suppliers
Caparol Farben Lacke GmbH
manufacturer
Roßdörfer Straße 50, 64372 Ober-Ramstadt
+496154710
Emergency Contacts
GBK GmbH
+49613284463
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Emulsion paint, emission-free and solvent-free
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| titanium dioxide EC: 236-675-5 | 13463-67-7 | 10 - 20% | Yes |
| 1,2-benzisothiazol-3(2H)-one EC: 220-120-9 | 2634-33-5 | 0.025 - 0.05% | Yes |
| reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1) | 55965-84-9 | 0.0002 - 0.0015% | Yes |
| Talc (Mg3H2(SiO3)4) EC: 238-877-9 | 14807-96-6 | 10 - 20% | No |
| Kieselguhr, soda ash flux-calcined EC: 272-489-0 | 68855-54-9 | 1 - 10% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air.
Do NOT use solvents or thinners. In case of contact, immediately flush skin with soap and plenty of water.
If eye irritation persists: Get medical advice/ attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Seek medical advice. Clean mouth with water and drink afterwards plenty of water. If swallowed, DO NOT induce vomiting.
Immediate Medical Attention
Seek medical advice.
Medical Treatment
No information available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
None known.
In case of fire hazardous decomposition products may be produced such as: Carbon monoxide, carbon dioxide and unburned hydrocarbons (smoke).
Standard procedure for chemical fires.
Firefighter Protection
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Prevent further leakage or spillage if safe to do so.
Keep in suitable, closed containers for disposal. Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
For personal protection see section 8. No special technical protective measures required. In addition, the current technical information for this product and its application on www.caparol.com must be observed.
Perishable if frozen. To maintain product quality, do not store in heat or direct sunlight. Store at room temperature in the original container. Containers which are opened must be carefully resealed and kept upright to prevent leakage.
Wash hands before eating, drinking, or smoking. Do not eat, drink or smoke when using this product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Material : Nitrile rubber Glove thickness : 0,2 mm Protective index : Class 3 Remarks : Before removing gloves clean them with soap and water. Wear suitable gloves tested to EN374. German trade association leaflet: Carry gloves (ZH 1/706)
German trade association rules - BGR 192 Eye protection Goggles
No personal respiratory protective equipment normally required. German trade association rules - BGR 190 Breathing protection During spray application: Do not breathe spray dust. Use A2/P2 combination filter for paint spraying.
Safety shoes Long sleeved clothing Choose body protection according to the amount and concentration of the dangerous substance at the work place.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if stored and applied as directed.
No decomposition if stored and applied as directed.
No decomposition if stored and applied as directed.
Protect from frost, heat and sunlight.
Incompatible with acids and bases. Incompatible with oxidizing agents.
No decomposition if stored and applied as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Caparol Amphibolin?
The signal word is no signal word.
What is the physical form of Caparol Amphibolin?
Caparol Amphibolin is a liquid appearing as liquid with no data available color. It has no data available odor.
What is Caparol Amphibolin used for?
Water-borne coatings
What is the melting point of Caparol Amphibolin?
The melting point is not determined and the boiling point is not determined.