Parabond Crystal

Allow affected person to breathe fresh air. Not expected to present a significant inhalation hazard under anticipated conditions of normal use. Allow affected person to breathe fresh air. Allow the victim to rest.

Not expected to present a significant skin hazard under anticipated conditions of normal use. Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse.

Wash immediately with lots of water (15 minutes)/shower. Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persists. If eye irritation persists, consult a specialist.

Symptoms: pain, blinking or redness

Not expected to present a significant ingestion hazard under anticipated conditions of normal use. Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention.

All extinguishing media allowed. Foam. Dry powder. Carbon dioxide. Water spray. Sand.

Do not use a heavy water stream.

Hydrolysis products reduce the flash point.

Cool down the containers exposed to heat with a water spray. Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire fighting water from entering the environment.

Evacuate unnecessary personnel. Ventilate area.

Avoid sub-soil penetration. Do not allow into drains or water courses. Prevent entry to sewers and public waters.

Take up mechanically (sweeping, shovelling) and collect in suitable container for disposal. Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage.

Materials: inert solids, such as clay or diatomaceous earth

Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapour.

Store in a cool, well-ventilated place. Keep only in the original container. Keep container closed when not in use.

Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.

Keep away from sources of ignition.

Ensure good ventilation of the work station.

Time of penetration is to be checked with the glove producer. Please follow the instructions related to the permeability and the penetration time provided by the manufacturer. Gloves must be replaced after each use and whenever signs of wear or perforation appear. Wear protective gloves. Type: Disposable gloves, Material: Nitrile rubber (NBR), Permeation: 3 (> 60 minutes), Thickness: > 0,35 mm, Standard: EN ISO 374.

Chemical goggles or safety glasses. Type: Safety glasses, Field of application: Droplet, Characteristics: With side shields, Standard: EN 166.

No special respiratory protection equipment is recommended under normal conditions of use with adequate ventilation. Ensure there is adequate ventilation. Wear appropriate mask

No special clothing/skin protection equipment is recommended under normal conditions of use

Stable at ambient temperature and under normal conditions of use.

No dangerous reactions known under normal conditions of use.

None under normal use. Not established.

Direct sunlight. Extremely high or low temperatures.

Strong acids. Strong bases.

None under normal conditions. fume. Carbon monoxide. Carbon dioxide.