Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Thiocare® C101 71%
- Chemical Name
- Ammonium mercaptoacetate
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- 01-2119531489-31
- UFI Code
- G8J0-W0GT-Q00P-SN2U
Identified Uses
Cleaning agent, Wide dispersive indoor use of reactive substances in open systems, Use in batch and other process (synthesis) where opportunity for exposure arises, Transfer of substance or preparation (charging/discharging) from/to vessels/ large containers at non-dedicated facilities, Non industrial spraying, Treatment of articles by dipping and pouring, Hand-mixing with intimate contact and only PPE available
Manufacturers & Suppliers
Bruno Bock GmbH
manufacturer
Eichholzer Straße 23, D-21436 Marschacht, Germany
++49(0)4176-6469-700
Emergency Contacts
CHEMTREC
+44 20 3885 0382
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS06
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Aqueous solution of ammonium thioglycolate.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ammonium mercapto-acetate EC: 226-540-9 | 5421-46-5 | 71% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. Oxygen, if needed. If symptoms persist, call a physician. Call a doctor immediately.
Symptoms: risk of absorption and thus poisoning
Wash off with plenty of water.
Symptoms: Absorption through the skin is minimal. Irritation, sensitization.
Rinse immediately with plenty of water and seek medical advice.
Symptoms: Conjunctivitis
Induce vomiting if person is conscious. Rinse mouth. If conscious, give the victim plenty of water to drink. In the case of spontaneous vomiting, hold person's head low to prevent inhalation into the wind-pipe.
Symptoms: Systemic toxicity if swallowed. Nausea, vomiting, poisoning possible.
Immediate Medical Attention
Call a doctor immediately.
Medical Treatment
Systemic poisoning, heart and circulatory reaction, breathing problems.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide (CO2), Foam, Water spray jet
Exposure to decomposition products may be a hazard to health.
Use water spray to cool unopened containers.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Evacuate personnel to safe areas. Keep people away from and upwind of spill/leak.
Must not get into the soil, sewerage systems and surface water.
Soak up with inert absorbent material
Materials: sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle and open container with care. Avoid contact with skin and eyes.
Store at room temperature in the original container. Keep containers tightly closed in a cool, well-ventilated place.
When using do not eat or drink.
Keep away from heat and sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Application in a closed system. Should it be technically impossible to use a closed system, the exposure of staff should be kept to a minimum, in accordance with the latest technical standards, e.g. by using suitable exhauster devices.
Protective gloves. Polychloroprene / Layer thickness 0,5 - 0,7 mm / Break through time > 480 min (level 6) / EN 374-3. Butyl-rubber / Layer thickness 0,6 - 0,8 mm / Break through time > 480 min (level 6) / EN 374. General recommendation: the usage time for protective gloves is approx. 50% of the breakthrough time measured in the laboratory.
Wear eye/face protection. Tightly fitting safety goggles
Should fumes/aerosols arise, wear breathing apparatus with its own separate air supply. Suitable for use as an emergency mask: Filter Type A. Follow the instructions for use issued by the producer.
Wear closed work/protective clothing. When filling and refilling outside a closed system, additionally put on aprons made of polyethylene (PE).
Must not get into the soil, sewerage systems and surface water. In the event of contamination, notify the responsible authorities.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No dangerous reaction known under conditions of normal use.
Do not expose to temperatures above: 75 °C
Incompatible with oxidizing agents.
Thermal decomposition
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2922
- Shipping Name
- Corrosive liquid, toxic, n.o.s. (Ammonium thioglycolate)
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Thiocare® C101 71%?
The signal word is danger.
What is the physical form of Thiocare® C101 71%?
Thiocare® C101 71% is a liquid with clear, nearly colorless color. It has characteristic odor.
What is Thiocare® C101 71% used for?
Cleaning agent, Wide dispersive indoor use of reactive substances in open systems, Use in batch and other process (synthesis) where opportunity for exposure arises, Transfer of substance or preparation (charging/discharging) from/to vessels/ large containers at non-dedicated facilities, Non industrial spraying, Treatment of articles by dipping and pouring, Hand-mixing with intimate contact and only PPE available
What are the hazard statements for Thiocare® C101 71%?
This substance has 4 hazard statements:
- H290: May be corrosive to metals. Kann gegenüber Metallen korrosiv sein.
- H301: Toxic if swallowed. Giftig bei Verschlucken.
- H317: May cause an allergic skin reaction. Kann allergische Hautreaktionen verursachen.
- H412: Harmful to aquatic life with long lasting effects. Schädlich für Wasserorganismen, mit langfristiger Wirkung.
What is the melting point of Thiocare® C101 71%?
The melting point is < -20 °C and the boiling point is 115 °C at 1.021 hPa.