Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Edoflex
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Printing chemical
Manufacturers & Suppliers
Dortschy GmbH & Co. KG
Windelsbleicher Str. 15, DE-33647 Bielefeld
+49 (0) 521 / 94267-0
Emergency Contacts
DOT
+49 - 700 - 24 112 112 (DOT)
DOT
011 - 49 - 700 - 24 112 112 (DOT)
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS05
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C6-C7, isoalkanes, cyclics, < 5 % n-Hexane / Naphtha (petroleum), hydrotreated light EC: 926-605-8 | 64742-49-0 | 50 - 65% | Yes |
| Butane EC: 203-448-7 | 106-97-8 | 25 - 35% | Yes |
| Propane EC: 200-827-9 | 74-98-6 | 5 - 15% | Yes |
| 2-Methylpropan-1-ol EC: 201-148-0 | 78-83-1 | 1 - 5% | Yes |
| n-Hexane EC: 203-777-6 | 110-54-3 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. In case of respiratory tract irritation, consult a physician.
After contact with skin, wash immediately with plenty of water and soap. In case of skin reactions, consult a physician.
Rinse immediately carefully and thoroughly with eye-bath or water. Protect uninjured eye.
Call a physician in any case!
Immediate Medical Attention
Call a physician in any case! In case of respiratory tract irritation, consult a physician. In case of skin reactions, consult a physician.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam Carbon dioxide (CO₂). Extinguishing powder. Water mist
Full water jet
Vapours can form explosive mixtures with air.
Move undamaged containers from immediate hazard area if it can be done safely.
Firefighter Protection
Wear a self-contained breathing apparatus and chemical protective clothing. Use water spray jet to protect personnel and to cool endangered containers.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove persons to safety. Provide adequate ventilation. Keep away from sources of ignition. - No smoking.
Suppress gases/vapours/mists with water spray jet. Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains.
Take up mechanically
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Minimum standard for preventive measures while handling with working materials are specified in the TRGS 500¹.
Keep in a cool, well-ventilated place. Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50°C. Do not pierce or burn, even after use.
When using do not eat, drink, smoke, sniff.
Remove all sources of ignition. Take precautionary measures against static discharges. Use explosion-proof machinery, apparatus, ventilation facilities, tools etc. Ignition group : T2. Fire class : C
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
If handled uncovered, arrangements with local exhaust ventilation have to be used. If local exhaust ventilation is not possible or not sufficient, the entire working area should be ventilated by technical means.
Suitable material : NBR (Nitrile rubber) Breakthrough time (maximum wearing time) : > 3600 s (LEVEL 3) Thickness of the glove material (mm) : 0,2 Additional hand protection measures : Wear cotton undermitten if possible. Remark : For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. In the case of wanting to use the gloves again, clean them before taking off and air them well.
Eye glasses with side protection
If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn. Combination filtering device (EN 14387) A - P 2
The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under normal ambient conditions (+20° C room temperature).
There are no data available on the mixture itself.
There are no data available on the mixture itself.
Only use the material in places where open light, fire and other flammable sources can be kept away.
Oxidising agent
In case of warming: Vapours can form explosive mixtures with air.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Edoflex?
The signal word is danger.
What is the physical form of Edoflex?
Edoflex is a compressed gas with colourless color. It has characteristic odor.
What is Edoflex used for?
Printing chemical
What are the hazard statements for Edoflex?
This substance has 4 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H318: Causes serious eye damage.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of Edoflex?
The melting point is No data available and the boiling point is < -10 °C ( 1013 hPa ).