Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MOBIL DTE 25
- Product Code
- 201560102020, 602631-00, 970826
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Hydraulic fluid
Manufacturers & Suppliers
EXXON MOBIL CORPORATION
manufacturer
22777 Springwoods Village Parkway, Spring, TX 77389 USA
800-662-4525
http://www.exxon.com, http://www.mobil.com
Emergency Contacts
24 Hour Health Emergency
609-737-4411
CHEMTREC
800-424-9300
CHEMTREC
703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
GHS06
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2,6-DI-TERT-BUTYL-P-CRESOL | 128-37-0 | 0.1 - 1% | Yes |
| CALCIUM SULFONATE | 57855-77-3 | 0.1 - 1% | Yes |
| PHOSPHORODITHIOIC ACID, MIXED 0,0-BIS(2-ETHYL HEXYL AND ISO-BU) ESTERS, ZINC SALTS. | 68442-22-8 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove from further exposure. For those providing assistance, avoid exposure to yourself or others. Use adequate respiratory protection. If breathing has stopped, assist ventilation with a mechanical device or use mouth-to-mouth resuscitation.
Symptoms: respiratory irritation, dizziness, nausea, or unconsciousness
Wash contact areas with soap and water.
Flush thoroughly with water.
Symptoms: irritation
First aid is normally not required.
Symptoms: discomfort
Immediate Medical Attention
Seek immediate medical assistance if respiratory irritation, dizziness, nausea, or unconsciousness occurs. If product is injected into or under the skin, or into any part of the body, regardless of the appearance of the wound or its size, the individual should be evaluated immediately by a physician as a surgical emergency. Seek medical attention if eye irritation occurs. Seek medical attention if discomfort occurs after ingestion.
Medical Treatment
Early surgical treatment within the first few hours may significantly reduce the ultimate extent of injury for high pressure injection.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish flames.
Straight Streams of Water
Pressurized mists may form a flammable mixture.
Evacuate area. Prevent runoff from fire control or dilution from entering streams, sewers, or drinking water supply. Use water spray to cool fire exposed surfaces and to protect personnel.
Firefighter Protection
Firefighters should use standard protective equipment and in enclosed spaces, self-contained breathing apparatus (SCBA).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stop leak if you can do it without risk.
Normal antistatic work clothes are usually adequate.
Dike far ahead of liquid spill for later recovery and disposal. Full body suit of chemical resistant, antistatic material is recommended.
Prevent entry into waterways, sewers, basements or confined areas.
Recover by pumping or with suitable absorbent. Remove from the surface by skimming or with suitable absorbents.
Materials: suitable absorbent
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent small spills and leakage to avoid slip hazard. Material can accumulate static charges which may cause an electrical spark (ignition source). Use proper bonding and/or ground procedures. Static Accumulator: This material is a static accumulator.
Do not store in open or unlabelled containers. Keep away from incompatible materials.
Use proper bonding and/or ground procedures to prevent static accumulation and ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Material is stable under normal conditions.
See sub-sections below.
Hazardous polymerization will not occur.
Excessive heat. High energy sources of ignition.
Strong oxidizers
Material does not decompose at ambient temperatures.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MOBIL DTE 25?
The signal word is danger.
What is the physical form of MOBIL DTE 25?
MOBIL DTE 25 is a liquid with brown color. It has characteristic odor.
What is MOBIL DTE 25 used for?
Hydraulic fluid
What are the hazard statements for MOBIL DTE 25?
This substance has 3 hazard statements:
- H310: High-pressure injection under skin may cause serious damage.
- H315: Excessive exposure may result in eye, skin, or respiratory irritation.
- No significant hazards.