Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Ethyl acetate
- Product Code
- E/0850/08, E/0850/15, E/0850/17, E/0850/21, E/0850/24, E/0850/25, E/0850/27, E/0850/31VL, E/0850/MC15, E/0850/PB17, E/0850/PC17, E/0850/21RSS, E/0850/24RSS, E/0850/25RSS, E/0850/34RSS, E/0850/27RSS, E/0850/21S
- Synonyms
- Acetic acid ethyl ester
Regulatory Identifiers
- CAS Number
- 141-78-6 Check regulations →
Identified Uses
Laboratory chemicals.
Uses advised against
This product does not contain any substance(s) on the Illicit Drug Precursors/Reagents list. This product does not contain any substance(s) subject to Prohibition, Authorization or Restriction. This product does not contain any substance(s) listed on the voluntary National Code of Practice for Chemicals of Security Concern.
Manufacturers & Suppliers
ThermoFisher Scientific Australia Pty Ltd
national supplier
5 Caribbean Drive, Scoresby VICTORIA 3179, Australia
1300 735 292
Emergency Contacts
CHEMTREC®
03 9757 4559
CHEMTREC®
+613 9757 4559
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethyl acetate | 141-78-6 | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If not breathing, give artificial respiration. Get medical attention if symptoms occur.
Symptoms: Difficulty in breathing. Inhalation of high vapor concentrations may cause symptoms like headache, dizziness, tiredness, nausea and vomiting.
Wash off immediately with plenty of water for at least 15 minutes. If skin irritation persists, call a physician.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Clean mouth with water and drink afterwards plenty of water.
Immediate Medical Attention
Get medical attention if symptoms occur.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, carbon dioxide (CO2), dry chemical, alcohol-resistant foam.
Do not use a solid water stream as it may scatter and spread fire.
Flammable. Risk of ignition. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Containers may explode when heated.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment as required. Ensure adequate ventilation.
Soak up with inert absorbent material. Keep in suitable, closed containers for disposal.
Typically only supplied is small quantities as packaged goods. If extremely toxic or used in larger quantities ensure a spillage action plan is in place. Evacuate area. Control the source and/or contain the spill if safe and able to do so. Use temporary diking, sand bags, dry sand, earth or proprietary booms/absorbent pads if available. Obtain advice on containment, neutralisation and clean-up from local emergency responders.
Should not be released into the environment. See Section 12 for additional Ecological Information.
Soak up with inert absorbent material.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure adequate ventilation. Wear personal protective equipment/face protection. Do not get in eyes, on skin, or on clothing. Avoid ingestion and inhalation.
Flammables area. Keep away from heat, sparks and flame. Keep container tightly closed in a dry and well-ventilated place.
Keep away from heat, sparks and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
None known, based on information available
Hazardous polymerization does not occur.
Incompatible products, Keep away from open flames, hot surfaces and sources of ignition.
Strong oxidizing agents, Strong acids, Amines, Peroxides.
Carbon monoxide (CO). Carbon dioxide (CO₂).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1173
- Shipping Name
- ETHYL ACETATE
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Ethyl acetate known by?
Ethyl acetate is also known as: Acetic acid ethyl ester
What is the hazard signal word for Ethyl acetate?
The signal word is danger.
What is the physical form of Ethyl acetate?
Ethyl acetate is a liquid appearing as colorless with colorless color. It has sweet odor.
What is Ethyl acetate used for?
Laboratory chemicals.
What are the hazard statements for Ethyl acetate?
This substance has 3 hazard statements:
- H225: Highly flammable liquid and vapor
- H319: Causes serious eye irritation
- H336: May cause drowsiness or dizziness
What is the melting point of Ethyl acetate?
The melting point is -83.5 °C / -118.3 °F and the boiling point is 75 - 78 °C / 167 - 172.4 °F.