Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Agarose
- Product Code
- BP165-25
Regulatory Identifiers
- CAS Number
- 9012-36-6 Check regulations →
Identified Uses
Laboratory chemicals.
Uses advised against
This product does not contain any substance(s) on the Illicit Drug Precursors/Reagents list. This product does not contain any substance(s) subject to Prohibition, Authorization or Restriction. This product does not contain any substance(s) listed on the voluntary National Code of Practice for Chemicals of Security Concern.
Manufacturers & Suppliers
ThermoFisher Scientific Australia Pty Ltd
manufacturer
5 Caribbean Drive, Scoresby, VICTORIA 3179, Australia
1300 735 292
Emergency Contacts
CHEMTREC®
03 9757 4559
CHEMTREC®
+613 9757 4559
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Agarose | 9012-36-6 | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove from exposure, lie down. Remove to fresh air. Get medical attention.
Wash off immediately with plenty of water for at least 15 minutes. Get medical attention.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Do NOT induce vomiting. Get medical attention.
Immediate Medical Attention
Get medical attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Carbon dioxide (CO₂). Dry chemical. Chemical foam.
No information available.
Thermal decomposition can lead to release of irritating gases and vapors.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Use personal protective equipment as required. Avoid dust formation.
Avoid dust formation. Sweep up and shovel into suitable containers for disposal. Do not let this chemical enter the environment.
Not applicable, packaged goods.
See Section 12 for additional Ecological Information.
Sweep up and shovel into suitable containers for disposal.
Materials: suitable containers
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear personal protective equipment/face protection. Ensure adequate ventilation. Avoid dust formation. Avoid contact with skin and eyes. Do not breathe dust. Do not ingest. If swallowed then seek immediate medical assistance.
Keep in a dry, cool and well-ventilated place. Keep container tightly closed.
Do not ingest.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
None under normal use conditions.
Protective gloves. Glove materials: Nitrile rubber, Neoprene, Natural rubber, PVC. Breakthrough time: See manufacturers recommendations. AS/NZS 2161. Inspect gloves before use. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. (Refer to manufacturer/supplier for information). Ensure gloves are suitable for the task: Chemical compatibility, Dexterity, Operational conditions, User susceptibility, e.g. sensitisation effects, also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion. Remove gloves with care avoiding skin contamination.
Wear safety glasses with side shields (or goggles) (Australian/New Zealand Standard AS/NZS 1337 - Eye protectors for Industrial applications)
Use an AS/NZS 1716 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. To protect the wearer, respiratory protective equipment must be the correct fit and be used and maintained in line with AS/NZS 1715 on the use and maintenance of respiratory protective devices. Recommended Filter type: Particle filter (or AUS/NZ equivalent)
Long sleeved clothing
No information available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable.
None known, based on information available
No information available.
Avoid dust formation, Incompatible products.
Acids, Strong oxidizing agents.
Carbon monoxide (CO). Carbon dioxide (CO₂).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Agarose?
The signal word is no signal word.
What is the physical form of Agarose?
Agarose is a powder solid appearing as light cream . It has odorless odor.
What is Agarose used for?
Laboratory chemicals.
What is the melting point of Agarose?
The melting point is No data available and the boiling point is No information available.