Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Microcystin-LR
- Product Code
- ALX-350-012
Regulatory Identifiers
- CAS Number
- 101043-37-2 Check regulations →
Identified Uses
For Research Use only; Laboratory chemicals
Manufacturers & Suppliers
Enzo Life Sciences, Inc.
manufacturer
10 Executive Boulevard Farmingdale, NY 11735 U.S.A.
+800-942-0430
Emergency Contacts
Emergency Contact
+1 800-255-3924
Emergency Contact
+01-813-248-0585
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS06
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Microcystin-LR | 101043-37-2 | --- | No |
Identification number(s): None
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air or oxygen; call for doctor. In case of unconsciousness place patient stably in side position for transportation.
Immediately wash with water and soap and rinse thoroughly. Remove contaminated clothing.
Rinse opened eye for several minutes under running water. Check for and remove contact lenses. If symptoms persist, consult a doctor.
Do not induce vomiting; call for medical help immediately.
Immediate Medical Attention
Call for doctor or medical help immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire extinguishing methods suitable to surrounding conditions.
Do not inhale explosion gases or combustion gases.
Firefighter Protection
Mouth respiratory protective device. Wear self-contained respiratory protective device. Do not inhale explosion gases or combustion gases. Wear fully protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter sewers/ surface or ground water.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Open and handle receptacle with care.
Store tightly sealed in a cool, dry and well ventilated location. Store under lock and key and with access restricted to technical experts or their assistants only. Keep container tightly sealed.
Keep respiratory protective device available.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/the preparation/the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: Nitrile rubber, NBR. Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable.
No further relevant information available.
No dangerous reactions known.
No decomposition if used according to specifications.
strong oxidizing agents.
No decomposition if used according to specifications.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3462
- Shipping Name
- TOXINS, EXTRACTED FROM LIVING SOURCES, SOLID, N.O.S. (Microcystin-LR)
- Transport Class
- 6.1
- Packing Group
- I
Warning: Toxic substances.
Warning: Toxic substances.
Warning: Toxic substances.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Microcystin-LR?
The signal word is danger.
What is the physical form of Microcystin-LR?
Microcystin-LR is a film appearing as film with whitish color. It has characteristic odor.
What is Microcystin-LR used for?
For Research Use only; Laboratory chemicals
What are the hazard statements for Microcystin-LR?
This substance has 5 hazard statements:
- H300 + H310 + H330: Fatal if swallowed, in contact with skin or if inhaled.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.
What is the melting point of Microcystin-LR?
The melting point is Undetermined. and the boiling point is Undetermined..