NextSDS Logo
Safety Data Sheet EN

Peptone from casein pancreatically digested, granulated for microbiology

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Peptone from casein pancreatically digested, granulated for microbiology
Product Code
107213

Regulatory Identifiers

CAS Number
N/A
REACH No.
A registration number is not available for this substance as the substance or its use are exempted from registration according to Article 2 REACH Regulation (EC) No 1907/2006, the annual tonnage does not require a registration or the registration is envisaged for a later registration deadline.

Identified Uses

Reagent for development and research, Chemical production

Manufacturers & Suppliers

M

Merck KGaA

manufacturer

64271 Darmstadt, Germany

+49 6151 72-0

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Peptone from casein pancreatically digested, granulated for microbiology

Chemical Name CAS Number Concentration Hazardous
Peptone from casein pancreatically digested, granulated for microbiology EC: 293-428-4 91079-40-2 --- No

For the full text of the H-Statements mentioned in this Section, see Section 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

fresh air.

Skin contact

wash off with plenty of water. Remove contaminated clothing.

Eye contact

rinse out with plenty of water.

Ingestion

make victim drink water (two glasses at most). Consult doctor if feeling unwell.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water, Foam, Carbon dioxide (CO2), Dry powder

Unsuitable media

For this substance/mixture no limitations of extinguishing agents are given.

Specific hazards

Development of hazardous combustion gases or vapours possible in the event of fire.

Firefighter Protection

In the event of fire, wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Avoid inhalation of dusts. Evacuate the danger area, observe emergency procedures, consult an expert.

Environmental

Do not let product enter drains.

Cleanup methods

Take up dry. Clean up affected area.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Observe label precautions.

Storage

Tightly closed. Dry. Store at +15°C to +25°C.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Technical measures and appropriate working operations should be given priority over the use of personal protective equipment. See section 7.1.

Hands

full contact: Glove material: Nitrile rubber, Glove thickness: 0,11 mm, Break through time: > 480 min; splash contact: Glove material: Nitrile rubber, Glove thickness: 0,11 mm, Break through time: > 480 min. The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example KCL 741 Dermatril® L (full contact), KCL 741 Dermatril® L (splash contact). The breakthrough times stated above were determined by KCL in laboratory tests acc. to EN374 with samples of the recommended glove types. This recommendation applies only to the product stated in the safety data sheet supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).

Eyes

Safety glasses

Respiratory

required when dusts are generated. Recommended Filter type: Filter P 1 (acc. to DIN 3181) for solid particles of inert substances. The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

Skin/Body

Protective clothing needs to be selected specifically for the workplace, depending on concentrations and quantities of the hazardous substances handled. The chemical resistance of the protective equipment should be enquired at the respective supplier.

Environmental

Do not let product enter drains.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Lower Explosive Limit
No information available.
Flash Point
No information available.
Dynamic Viscosity
No information available.
Kinematic Viscosity
---
State Under Standard Conditions
---
Explosive Limits
---
Boiling Point
No information available.
Cloud Point
---
Flammability
No information available.
Odor Threshold
No information available.
Solidification Point
---
Solubility
---
Physical State
solid
Colour Intensity
---
Appearance
---
Decomposition Temperature
No information available.
Ph
No information available.
Solubility In Water
ca.800 g/l at 20 °C
Properties Status
---
Metal Corrosion
---
Density
---
Physical State Data
solid
Solubility In Fat
---
Softening Point
---
Upper Explosive Limit
No information available.
Voc Content
---
Melting Point
No information available.
Colour
light brown
Vapor Pressure
No information available.
Partition Coefficient
No information available.
Molecular Weight
---
Freezing Point
---
Vapor Density
---
Relative Density
No information available.
Evaporation Rate
No information available.
Auto Ignition Temperature
No information available.
Relative Evaporation Rate
---
Form
solid
Bulk Density
490 kg/m³
Odor
characteristic
Crystallisation Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

sensitive to moisture

Reactivity

The following applies in general to flammable organic substances and preparations: in correspondingly fine distribution, when whirled up a dust explosion potential may generally be assumed.

Hazardous reactions

no information available

Avoid

no information available

Incompatible

no information available

Decomposition

no information available

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Peptone from casein pancreatically digested, granulated for microbiology?

The signal word is no signal word.

What is the physical form of Peptone from casein pancreatically digested, granulated for microbiology?

Peptone from casein pancreatically digested, granulated for microbiology is a solid with light brown color. It has characteristic odor.

What is Peptone from casein pancreatically digested, granulated for microbiology used for?

Reagent for development and research, Chemical production

What is the melting point of Peptone from casein pancreatically digested, granulated for microbiology?

The melting point is No information available. and the boiling point is No information available..