Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Ferrous sulfate
- Product Code
- SLF1516
- Chemical Name
- Ferrous Sulfate
- Synonyms
- Ferrous Sulfate Hydrate; Ferrous Sulfate Dried Powder
Regulatory Identifiers
- CAS Number
- 13463-43-9 Check regulations →
Manufacturers & Suppliers
Sciencelab.com, Inc.
manufacturer
14025 Smith Rd. Houston, Texas 77396
1-281-441-4400
ScienceLab.com
Emergency Contacts
CHEMTREC
1-800-424-9300
24HR
International CHEMTREC
1-703-527-3887
24HR
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ferrous sulfate | 13463-43-9 | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
In case of contact, immediately flush skin with plenty of water. Cover the irritated skin with an emollient. Remove contaminated clothing and shoes. Cold water may be used. Wash clothing before reuse. Thoroughly clean shoes before reuse. Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream.
Symptoms: irritated skin
Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used.
Loosen tight clothing such as a collar, tie, belt or waistband.
Immediate Medical Attention
Get medical attention. Seek medical attention. Call a physician immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system. Be careful that the product is not present at a concentration level above TLV. Check TLV on the MSDS and with local authorities.
Related Products
Similar products with comparable safety profiles
Ferrous ammonium sulfate hexahydrate
CAS: 7783-85-9 (Hexahydrate); 10045-89-3 (anhydrous)
Iron(II) sulfate heptahydrate
CAS: 7782-63-0
Iron(II) sulfate heptahydrate
CAS: 7782-63-0
Iron(II) sulfate heptahydrate
CAS: 7782-63-0
Ferric Ammonium Sulfate 2.5 percent
---
Iron(II)sulfate Heptahydrate
CAS: 7782-63-0
Iron(II) sulfide
CAS: 1317-37-9
Iron(II) sulfide
CAS: 1317-37-9
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not breathe dust. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment. If you feel unwell, seek medical attention and show the label when possible. Avoid contact with skin and eyes.
Hygroscopic. Keep container tightly closed. Keep container in a cool, well-ventilated area. Do not store above 24°C (75.2°F).
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.
Gloves.
Splash goggles.
Dust respirator. Be sure to use an approved/certified respirator or equivalent. A self contained breathing apparatus should be used to avoid inhalation of the product.
Lab coat. Full suit. Boots.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable.
Hygroscopic. Loses water at about 300 C. No other information found.
Will not occur.
Incompatibles
Not available.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Ferrous sulfate known by?
Ferrous sulfate is also known as: Ferrous Sulfate Hydrate; Ferrous Sulfate Dried Powder
What is the hazard signal word for Ferrous sulfate?
The signal word is no signal word.
What is the physical form of Ferrous sulfate?
Ferrous sulfate is a solid. appearing as grayish -white to yellowish. (light.) with grayish -white to yellowish. color. It has not available. odor.
What is the solubility of Ferrous sulfate?
Soluble in cold water.
What is the melting point of Ferrous sulfate?
The melting point is Not available. and the boiling point is Not available..