Guanidine hydrochloride

Allow the victim to rest in a well ventilated area. Seek immediate medical attention.

After contact with skin, wash immediately with plenty of water. Gently and thoroughly wash the contaminated skin with running water and non-abrasive soap. Be particularly careful to clean folds, crevices, creases and groin. Cold water may be used. Cover the irritated skin with an emollient. If irritation persists, seek medical attention. Wash contaminated clothing before reusing. For serious skin contact: Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek immediate medical attention.

Symptoms: Irritated skin.

Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Cold water may be used. Do not use an eye ointment. Seek medical attention.

Do not induce vomiting. Examine the lips and mouth to ascertain whether the tissues are damaged. Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not breathing, perform mouth-to-mouth resuscitation. Seek immediate medical attention.

Symptoms: Tissues are damaged (lips and mouth).

SMALL FIRE: Use DRY chemical powder. LARGE FIRE: Use water spray, fog or foam.

Do not use water jet.

May be combustible at high temperature.

SMALL FIRE: Use DRY chemical powder. LARGE FIRE: Use water spray, fog or foam. Do not use water jet.

Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.

Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system.

Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing material. Do not ingest. Do not breathe dust. If ingested, seek medical advice immediately and show the container or the label. Avoid contact with skin and eyes

Keep container dry. Keep in a cool place. Keep container tightly closed. Keep in a cool, well-ventilated place.

Do not ingest. Avoid contact with skin and eyes

Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing material.

Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.

Gloves.

Splash goggles.

Dust respirator. Be sure to use an approved/certified respirator or equivalent. In case of a large spill: A self contained breathing apparatus should be used to avoid inhalation of the product.

Lab coat. In case of a large spill: Full suit. Boots.

The product is stable.

Not available.

Polymerization: No.

Not available.

Not available.