Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Seneciphylline
- Product Code
- 89275
Regulatory Identifiers
- CAS Number
- 480-81-9 Check regulations →
Identified Uses
Reference substance
Manufacturers & Suppliers
PhytoLab GmbH & Co.KG
manufacturer
Dutendorfer Str. 5- 7, D- 91487 Vestenbergsgreuth
Germany/9163/88-327
Emergency Contacts
Emergency Contact
9163/88- 500
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS06
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Seneciphylline | 480-81-9 | --- | No |
chemical product
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air or oxygen; call for doctor.
Immediately wash with water and soap and rinse thoroughly.
Symptoms: Skin irritation
Rinse opened eye for several minutes under running water.
Rinse out mouth and then drink plenty of water. Do not induce vomiting; call for medical help immediately.
Immediate Medical Attention
Call for doctor; call for medical help immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Firefighter Protection
Wear self-contained respiratory protective device. Wear fully protective suit. Mount respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow product to reach sewage system or any water course.
Pick up mechanically.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handling corresponding to laboratory safety guidelines. Keep receptacles tightly sealed. Open and handle receptacle with care.
Store in cool, dry conditions in well sealed receptacles. Store in the dark.
Keep respiratory protective device available.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective gloves. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. Penetration time of glove material: The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
Required in case of dust formation. In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
Protective work clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under constant-temperature (see 7.)
No data available.
Strong oxidising agents.
no data available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1544
- Shipping Name
- ALKALOIDS, SOLID, N.O.S. (Seneciphylline)
- Transport Class
- 6.1
- Packing Group
- II
Warning: Toxic substances.
Warning: Toxic substances.
Warning: Toxic substances.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Seneciphylline?
The signal word is danger.
What is the physical form of Seneciphylline?
Seneciphylline is a solid appearing as powder, white with white color. It has no data available. odor.
What is Seneciphylline used for?
Reference substance
What are the hazard statements for Seneciphylline?
This substance has 3 hazard statements:
- H300: Fatal if swallowed.
- H310: Fatal in contact with skin.
- H330: Fatal if inhaled.
What is the melting point of Seneciphylline?
The melting point is 217.5°C and the boiling point is Undetermined..