NextSDS Logo
Safety Data Sheet EN

Alco - Spray

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Alco - Spray

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

BOMA logo

BOMA

Noorderlaan 131, B2030 Antwerpen

003232313389

http://www.boma.eu/

Emergency Contacts

Emergency Contact

003270245245

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2 H225

GHS Pictograms

GHS02 - Flammable

GHS02

Hazard Statements

H225 Highly flammable liquid and vapour.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P235 Keep cool.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P370 + P378 In case of fire: Use carbon dioxide (CO2) or dry chemical extinguisher for extinction
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Methyl ethyl ketone EC: 201-159-0 78-93-3 5% Yes
Ethanol EC: 200-578-6 64-17-5 30% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

let sit upright, fresh air, rest and take to hospital.

Skin contact

remove contaminated clothing, rinse with plenty of water, if necessary seek medical attention.

Eye contact

first prolonged rinsing with water (contact lenses to be removed if this is easily done) then take to physician.

Symptoms: redness

Ingestion

rinse mouth, take to hospital immediately.

Symptoms: diarrhoea, headache, abdominal cramps, sleepiness, vomiting

Immediate Medical Attention

take to hospital immediately (ingestion/inhalation), take to physician (eye contact), if necessary seek medical attention (skin contact).

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO2, foam, powder, sprayed water

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Do not walk into or touch spilled substances and avoid inhalation of fumes, smoke, dusts and vapours by staying up wind. Remove any contaminated clothing and used contaminated protective equipment and dispose of it safely.

Environmental

do not allow to flow into sewers or open water.

Cleanup methods

remove by using absorbent material

Materials: absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

handle with care to avoid spillage.

Storage

keep in a sealed container in a closed, frost-free, ventilated room.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

If necessary, use with sufficient exhaust ventilation.

Hands

handling with butyl-gloves (EN 374). Breakthrough time: >480' Material thickness: 0,7 mm. Thoroughly check gloves before use. Take of the gloves properly without touching the outside with your bare hands. The manufacturer of the protective gloves has to be consulted about the suitability for a specific work station.

Eyes

keep an eye-rinse bottle within reach. Tight-fitting safety goggles. Wear a face shield and protective suit in case of exceptional processing problems.

Respiratory

respiratory protection is not required. Use ABEK type gas masks in case of irritating exposure.

Skin/Body

impermeable clothing. The type of protective equipment depends on the concentration and amount of hazardous substances at the work station in question.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Properties Status
---
Solubility In Water
completely soluble
Lower Explosive Limit
---
Molecular Weight
---
Crystallisation Point
---
Explosive Limits
---
Auto Ignition Temperature
---
Appearance
liquid
Upper Explosive Limit
---
Softening Point
---
Evaporation Rate
2.000
Cloud Point
---
Flash Point
17 °C
Flammability
not applicable
Solidification Point
---
State Under Standard Conditions
---
Relative Density
0.857 kg/l
Vapor Pressure
---
Solubility
---
Physical State Data
liquid
Odor Threshold
not applicable
Physical State
liquid
Dynamic Viscosity
1 mPa.s
Relative Evaporation Rate
---
Boiling Point
78 °C
Melting Point
---
Bulk Density
---
Voc Content
80.00 %
Ph
7.3
Solubility In Fat
---
Vapor Density
not applicable
Odor
characteristic
Form
---
Colour
---
Density
---
Kinematic Viscosity
1 mm²/s
Partition Coefficient
not applicable
Metal Corrosion
---
Decomposition Temperature
---
Colour Intensity
---
Freezing Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

extremely high or low temperatures.

Reactivity

stable under normal conditions.

Avoid

protect from sunlight and do not expose to temperatures exceeding + 50°C.

Incompatible

acids, alkalines, oxidants, reductants

Decomposition

doesn't decompose with normal use

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1170
Shipping Name
Ethanol
Transport Class
3
Packing Group
II
ADR

Hazard characteristics: Risk of fire. Risk of explosion. Containments may explode when heated. Take cover. Keep out of low areas. Prevent leaking substances from running into the aquatic environment or the sewage system.

IMDG

Hazard characteristics: Risk of fire. Risk of explosion. Containments may explode when heated. Take cover. Keep out of low areas. Prevent leaking substances from running into the aquatic environment or the sewage system.

IATA

Hazard characteristics: Risk of fire. Risk of explosion. Containments may explode when heated. Take cover. Keep out of low areas. Prevent leaking substances from running into the aquatic environment or the sewage system.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Alco - Spray?

The signal word is danger.

What is the physical form of Alco - Spray?

Alco - Spray is a liquid appearing as liquid . It has characteristic odor.

What are the hazard statements for Alco - Spray?

This substance has 1 hazard statement:

  • H225: Highly flammable liquid and vapour.